Fenix L1P momentary switch TIP

maxemus · Dec 25, 2005

I donno if sumone have found this way or not..

1. Click ON
2. Slightly unscrew the tailcap, about 1/12 a turn. Jus to have the light go OFF.

Thats it..

Now try press on the tailcap with ur thumb, walla!

a momentary tailcap pressure switch! :wow:

Kershaw · Dec 25, 2005

Great tip, i discovered that a few weeks ago while i was fiddling with it while watching CSI: Las Vegas drooling over the M4s that the CSI's use.

Macaw · Dec 25, 2005

I can't do that any more with the 5 ohm Mod. I did learn the hard way thiough to store the light with the tail cap unscrewed at least 1/4 - 1/2 turn. I got lax about unscrewing the tailcap adequately and the light turned on in my pocket. By the time I felt the heat through the pouch, the flashlight was almost too hot to touch! I don't think it hurt anything, but took some life out of the new Lithium battery. I hope it didn't affect the life of the LED.

lexina · Dec 25, 2005

yes, i have been using the "twist-mode" all this while. can't do it with the Q3 though.

Fenix L1P momentary switch TIP

maxemus

Newly Enlightened

Kershaw

Enlightened

Macaw

Enlightened

lexina

Enlightened

Similar threads

Latest posts