surefire extender for nitrolon body

rajanf1

Newly Enlightened
Joined
Apr 16, 2003
Messages
79
Location
CAN
Is there a battery extender for G2 bodies? What is the part number? How long does (1xCR123, or 1.5xCR123) it extend? Where and how much does it cost?

I am in the impression that the A19 extenders for the 6P body is not compatible for the G2.

TIA.
 

falconz

Newly Enlightened
Joined
Jan 6, 2005
Messages
146
Location
Singapore
There are two models that I know of....
AN19 for 1 x CR123
AN14 for 1.5 x CR123
 

firefly99

Enlightened
Joined
May 22, 2005
Messages
748
rajanf1 said:
Is there a battery extender for G2 bodies? What is the part number? .
Yes, A19 for primary cells

rajanf1 said:
I am in the impression that the A19 extenders for the 6P body is not compatible for the G2.TIA.
G2 & 6P bodies are similar size just different material.

AN14 is the rechargeable battery extender for G2.
 
Last edited:

Bryan

Enlightened
Joined
Dec 22, 2005
Messages
361
Location
CA
firefly99 said:
Yes, A19.

I believe the AN14 is made for the G2, but it is a 1.5 battery extension made for SF's rechargeable conversion kit. The A19 is the one cell extension for the 6P, 9P, etc. Not sure if the A19 would look pretty on the G2 lol.

AN14

A19
 
Last edited by a moderator:

firefly99

Enlightened
Joined
May 22, 2005
Messages
748
Bryan said:
I believe the AN14 is made for the G2, but it is a 1.5 battery extension made for SF's rechargeable conversion kit. The A19 is the one cell extension for the 6P, 9P, etc. Not sure if it thread right on the G2, not to mention it wouldn't look too pretty lol.

Confirmed A19 thread will work on G2. I had this combination, G2+A19.

not too pretty, but it work.
 
Last edited:

Bryan

Enlightened
Joined
Dec 22, 2005
Messages
361
Location
CA
I found this on a Google search (I believes it belong to a member on here):

SureFire%20G2-old%20A19-KT2%2064.jpg

Photo by Size15's & hosted by PK. Hotlinked with permission from Size15's.

Not too pretty, but gives you an idea of what it would look like.
 
Last edited by a moderator:

SCblur

Enlightened
Joined
Dec 30, 2005
Messages
818
I am also looking to turn a G2 into a 9P. Would the extra heat from a 9P lamp be too much for the G2 bezel and lens? Would I be better off buying a 6P and modding that?
 

Bryan

Enlightened
Joined
Dec 22, 2005
Messages
361
Location
CA
SCblur said:
I am also looking to turn a G2 into a 9P. Would the extra heat from a 9P lamp be too much for the G2 bezel and lens? Would I be better off buying a 6P and modding that?

As long as you are sticking to the P90 lamp, I don't see a problem. The P61 lamp puts out more lumens than the P90 and it doesn't hurt the lens at all. The P91 lamp would probably be a problem on the other hand.

I don't think the G2 + A19 looks good at all, but that doesn't mean it won' work for your desires.
 

Size15's

Flashaholic
Joined
Aug 29, 2000
Messages
18,415
Location
Kettering, England
G2 with A19:
P96.jpg


G2 with AN14 making it a G2R:
P98.jpg

Shown with Z29 battery spacer so that G2R can use two-SF123As
Also shown is the B65 NiCad battery stick.

P97.jpg


Here is the G2, G2R and 8NXL
SureFire%20Nitrolons%2064.jpg
 

Bryan

Enlightened
Joined
Dec 22, 2005
Messages
361
Location
CA
Size15's said:
Shown with Z29 battery spacer so that G2R can use two-SF123As

So how does this make it any different from a standard G2? Just the length of the body?
 

SCblur

Enlightened
Joined
Dec 30, 2005
Messages
818
Thanks so much for the pictures size15's. They were very helpful.
 

Size15's

Flashaholic
Joined
Aug 29, 2000
Messages
18,415
Location
Kettering, England
Some SureFire History:

6R - 6P with A14 body extension and R60 lamp
7Z - CombatLight version of the 6R but a single body (R60 lamp)
6PX - 6P with R60 lamp
R60 - Lamp Assembly for the 6R & 7Z.

All the above have long since been discontinued.
The R60 was replaced by the P60.

The Z29 is intended for two main applications:
1) Ability to use two-SF123As in a 7Z when the B65 is flat/charging.
2) Ability to use two-SF123As in a 6R/G2R without having to remove the body extension which may take too long in certain situations.

The G2R (and 6R) have extended bodies capable of housing the B65. The Lamp Assembly is the same (P60).
 

rajanf1

Newly Enlightened
Joined
Apr 16, 2003
Messages
79
Location
CAN
My apologies for not even checking what I started. I have been very busy lately. Many thanks to those who replied.

Al, as always you have the answers. Now to another question. Is there a 0.5 spacer available effectively using a 3-cell in a G2+AN14+P90(or KL3) configuration?
 
Last edited:

Rogue_monkey

Enlightened
Joined
Nov 29, 2004
Messages
222
Location
Ontario, Can
rajanf1

AW sells copper spacers that will take up the space. You need to tape or heat shrink the copper spacer in order to insulate it from the battery tube. I run this set up with 2 pila 150s and a P90.
Its bright but its also long. Not bad setup tho.
 

Jamrock

Newly Enlightened
Joined
Mar 30, 2006
Messages
111
Location
Ewa Beach,Hawaii
Rogue_monkey said:
AW sells copper spacers that will take up the space. You need to tape or heat shrink the copper spacer in order to insulate it from the battery tube. I run this set up with 2 pila 150s and a P90.
Its bright but its also long. Not bad setup tho.


How is this set-up so far & what did you used to tape or heat shrink the spacer?
 
Last edited:
Top