Help Me Finish This! LEDs and my Hawg...

boltgunner

Newly Enlightened
Joined
Feb 23, 2006
Messages
36
Location
Houston
New to the forum - hello all!

Here's the deal - I have a SHO-ME LED Flasher module that gives stop turn tail to a single LED per side. See http://www.rimindustries.com/index.asp?PageAction=VIEWPROD&ProdID=48510 for the module. I cannot tell you what the output volts are in the tail mode, but it is low. The stop/turn mode puts out almost 12 VDC. The mfgr tells me the module will output 3 amps per side. Now, what I want to do is put a single red Luxeon III star (lambertian) in the optics lens/housing combo and put one red on each side of the bike facing aft, and an amber Luxeon III in the same optics (per side) facing forward for turn signals. Question is, what do I put between the flasher module and the LEDs to regulate? I am a mech engr and follow instructions very well, but no EE or techie. Thanks in advance!

SORRY - WRONG FORUM!!! MOVED!!!
 
Last edited:
Top