Sold/Expired F/S Mclux lights, PD, Xbin, E1E mod, ARC4, Surefire, Sale closed...

F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4 and others listed below.

Sale closed.. Mclux PD has just been milled for a tritium tube.

All lights are in excellent condition with tiny specks and/or light wear. Prices are shipped conus, insurance is extra. first to post "I'll take it" without change for item(s) desired gets it. Please PM for PP info.

1. Surefire 6P bored out for 18650 $65
2. early Xbin PR by McGizmo X3T $550
3. Mclux TK from Skunk run #063 $285 .... SOLD
4. Mclux PD w/very white beam $250..
5. Mclux Fireplug w/Ubin two stage flat tail
brightest Ubin I've ever seen! XO tint $295.. SOLD..
6. McGizmo modded E1E w/red luxeon $250
7. Stainless Fenix L1+, supports Li-ion $195
8. BB 750 TWOJ sandwich $45.. sold pending
9. NG 750 TXOJ sandwich $45 .. sold pending
10. ARC4 works great mint $140
11. ARC LS first run, extra bright low dome $225.. SOLD..
12. Lamda one watt sandwich, slighly oversized for mini-mag $30 .. sold..

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

I'll take the tk

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

Thanks!!

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

PM sent.

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

Hi cy! Is the PD a TYOJ or a TWOJ?

By the way, if it's a u-bin, I'll take it. =)

- FITP

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

One more post. =) I'm really intrigued about the fireplug, cy - I've never seen it mentioned before. Can you share with me any more about it? I'm searching CPF now...but any info on battery type, LED (a 3 or a 5?), etc. would be greatly appreciated!

- FITP

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

PD's color is TYOJ, very white pleasing beam...

Fireplug is A1 with CR2 body and two stage flat tailcap with two stage switch.

I've handled a number of Ubin's and this is the BRIGHTEST Ubin I've seen so far. puts out almost same amount of light as several Surefire L4 5watt in ceiling tests.

three watt Ubin w/DB requires CR2 li-ion to drive in regulation. you can also use with other body choices up to 3x CR123.

tint is an excellent XO or blueish tint, this is what I see, you may see differently. so bin would be UXOJ...

here's another pic..

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

Fireplug running thru Downboy draws 591 milliamps to overachieving Ubin.

Still available!!!

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

I'll take #4.

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

PD is still available.

lots of other lights still available!

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

PP sent for McLuxIII-PD.

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

If #5 is still available. I`ll take it.

Ken

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

#5 fireplug is sold..

lots of other lights still available!

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

#11 ARC LS first run is Sold...

lots of other lights available!

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

PayPal sent for fireplug.

Thanks,
Ken

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

In #2, by Xbin do you mean that it is X_ _ _ or _X0_? All of these look very nice, happy selling.

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

Mclux PD is still available.....

mini-modder.. Xbin PR was made by Don long before the new bin codes. I've tracked down this light all the way back to original purchaser. X3T is the actual bin for this light. beam is warm yellowish tint. this is what I see, you may see differently.

This Xbin light was lovingly EDC'd and has wear all over. only reason I'm selling is Xbin has been a safe queen too. it needs to be used again. with two stage upgrade, this light is fully functional. driven by BB750, you can use 2x CR123 or single li-ion.

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

Cy,

You never cease to amaze me with the unreal quantity and quality of the contents of your collection. Remarkable, and inspiring. I missed this one, would have lunged for the TK and fireplug. Xbin PR is too pricey for me. CNC light looks nice, dont know anything about it at all. Resembles Groovy.....

I have a burning question that would be incredibly nice to have answered. Okay, two of them. #1: whats yer favorite (single, all-time)? #2 how many (number, total, guess)?

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

I thought TIN bought the PD?

Anyhow Fenix L1+ = $225, I gotta ask, why so much?
Curious is all

Ryan

Re: F/S Mclux lights, TK, PD, Xbin, E1E mod, ARC4, Surefire, First run, CNC 123

Mini,

X refers to luminous flux as in 192-240 lumens or thereabouts when driven at spec current. The old color classification system used to be a single character, not two like the current binning system. The old one was a seimplistic scale of 1-5 with 3 (in the middle) being the closest to pure white. So X represented flux amount and a single 1-5 digit was the tint. The new system uses X and Y coordinates on a spectral response graph of Planckian blackbody temperature for much more precise description of nature of tint.

HTH