Here's another custom light I finished up today. I'm quite happy with the way it came out EXCEPT I'd like to smack around the Protection circuit people with there inaccurate specs!!! The protection circuit specs out 5 amps, plus or minus 1 amp. I'm drawing 3.2 amps on high and the protection circuit kicks in within a few seconds. I have some 8 amp units that should take care of this.
Update : the 8 amps protection circuits worked perfectly
Unit has a dual stage tailswitch.
Low = 380 Milliamps
High = 3.4 amps (WOW) around 600 lumens!
LG 2400Mah 18650 cells with protection circuit mounted with end insulated
Battery Pack with contacts added
Light Engine completed
Light Engine other end
Dual Bore to fit 18650's side by side
Wala the Green beauty is born
Size
Update : the 8 amps protection circuits worked perfectly
Unit has a dual stage tailswitch.
Low = 380 Milliamps
High = 3.4 amps (WOW) around 600 lumens!
LG 2400Mah 18650 cells with protection circuit mounted with end insulated
Battery Pack with contacts added
Light Engine completed
Light Engine other end
Dual Bore to fit 18650's side by side
Wala the Green beauty is born
Size
Last edited: