removing the reflector on an arc aaa-p
- Thread starter bkkd
- Start date
Help Support Candle Power Flashlight Forum
- Status
B@rt
Flashaholic
The reflector is part of the head and can't be removed. To polish the reflector, protect the LED with a piece of drinking straw and carefully handpolish with Flitz or a simular metal polish. 
chimo
Flashlight Enthusiast
Just so you know, polishing the reflector will essentially be a cosmetic improvement for the ArcAAA with a 5mm LED. This is due to the beam pattern of the 5mm LED - very little light comes out the sides so you will not likely notice any beam improvement by doing teh polishing.
greenLED
Flashaholic
Flitz is safe for use on LED's domes & Luxeon optics.
This thread has instructions on how to open the head. I'd just polish without taking anything apart, though.
This thread has instructions on how to open the head. I'd just polish without taking anything apart, though.
Last edited:
- Status
