Photos of new Mag 2D LED vs. MillerMods 1D Quad-Lux and 2D Tri-Lux

The 2D Tri-Lux is driving RV1H's at 900mA each and the Quad is driving UWOJ's at 500mA each. The current draw for the cells for the 2D Tri-lux is 4.2 amps for a runtime of over 2 hours down only 15% in brightness. The current draw from the cell for the 1D is 7.1 amps for a runtime of 1 hour and 15 minutes and down only 10% in brightness. All cells being used are NIMH and rated at 10 amp hours.

2D Tri Left, 1D Quad right

New Mag 2D LED vs. 1D Quad





New Mag 2D LED vs. 2D Tri


1D Quad vs. Fenix L2P

WOW! 91 views and not one ataboy, or that's nice or who cares? So what gives? IMO, the 1D cell mod is ground breaking. Makes me think....

I think its ground breaking too.
I know you have put alot in this and I'm excited because I want one.
Great Job

MM, yer makin' my Paypal finger itchy..........

.






Enough Said!!!


.

Nice job on the beamshots, very impressive from the 1D. I love the 1D and smaller form factor, will take those over the the 2D in a snap. I want one!

schiesz

4x UWOJ @500mA : each Lux produces ~70 lumens. It does ~280 lumens total !
Excellent !

How about my 2D Tri-Lux UWOJ @~1000mA, Eric ?

Flash007 said:

4x UWOJ @500mA : each Lux produces ~70 lumens. It does ~280 lumens total !
Excellent !

How about my 2D Tri-Lux UWOJ @~1000mA, Eric ?

Click to expand...

I'm building several orders this weekend. Yours is one of them.

That 1D is AWESOME. You do great work.

ataboy!

Jeff

Excellent news !
At wich current approximately will be my UWOJ's driven ?
~900, 950, 1000mA ?

Before shipping, is it possible to take some pictures of mine, and post it ?
Thanks.

:bow: :thanks: :goodjob:

The magled is pitiful next to those

Is my 1D on the build list?
Thanks

Don't know much about these - they sound perfect! The 1D is a cut down? MM, can you make up one of these, regulated, with a low power switch, either pulsed lower, or capable of switching between 1, 2, 3 or 4 leds? Cost? Make me one?? 2?
Cheers

That 1D is sick!!!

ayashko said:

Don't know much about these - they sound perfect! The 1D is a cut down? MM, can you make up one of these, regulated, with a low power switch, either pulsed lower, or capable of switching between 1, 2, 3 or 4 leds? Cost? Make me one?? 2?
Cheers

Click to expand...

My flagship mod will be the 1D Mag (A simple cut-down 2D from the bottom of the battery tube). It will ultimately be PIC contolled. I have a working proto of the PIC version, but production for sales will be awhile (maybe a month or less I hope). With a PIC, the 1D will be $175. The reflectors are IMS 20mm and will be fully intact (not cut down by 1/16th of an inch like my proto-versions I have Pics of in my B/S/T post).

Good news just the thing for me.
Am looking forward to these.
Thanks for the info.

Ok, these sound perfect then!
Could you please fill me in on the process for purchase from you?
First time buying something through this site...
Thanks!

ayashko said:

Ok, these sound perfect then!
Could you please fill me in on the process for purchase from you?
First time buying something through this site...
Thanks!

Click to expand...

Refer to this post in the Mod B/S/T forum:
https://www.candlepowerforums.com/threads/112351

That 1D is the one that I've already put in for and these photo's just let me know I've made the right choice. Great work MM.

Cliff

Looks like the MM modded Mag smoked the new led mag hands down :rock:
Eric, how bright will your lights be running on primary cells?