Sold/Expired FOUND WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

Hi,

edit:IsaacHayes is building this for me. THanks for the offers, this place is great.
sorry that i was tired and cant think normal. I just bought a McLuxPD so im loopy!!



i have the parts to build an Aleph Flupic Light engine. I also have big hands and no modding skills. I know that there are people who will build such a thing, Just PM with an offer. Looking to do this for less then 20 dollars, ill pay shipping both ways ect. Let me know! PM me please!

I have -Flupic 55mm (thicker size)
-UXOK led (on a star, has to be removed)
-Aleph light engine kit
-Wire
-Solder (prob just have you use your own)

Would need -Epoxy
-better modding skills then me

Let me know what you want. PLEASE HELP ME OUT! Thanks!
-bobby

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

Questions: Does the flupic fit in the E-can? Does it need potting epoxy? Are the connections marked on the board so I know what to solder where? If not diagram?

I've built 6 LE's before. They do take a good amount of time and lots and lots of AA epoxy.

How's $20 and I'll pay for shipping back?

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

I've built quite a few of them and they do require some care and lots of time. That is why i've stopped doing it.

Firstly, you'll need to sand very very little off the sides of the flupic board because it is a nice tight snug fit.

Also, file away two little notches, 180 degrees apart so that nothing touches the positive led and the other notch is for the ground connection.

Anyways, feel free to PM me if anyone decides to take this up. Cheers!

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

nakahoshi said:

... I have -Flupic 55mm (thicker size) ...

Click to expand...

:wow:... that's a fatty! :laughing: ... :wave:

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

Icarus said:

:wow:... that's a fatty! :laughing: ... :wave:

Click to expand...

ITs a special flupic. Has screw terminals, easy to use! :huh2:

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

IsaacHayes said:

Questions: Does the flupic fit in the E-can? Does it need potting epoxy? Are the connections marked on the board so I know what to solder where? If not diagram?

I've built 6 LE's before. They do take a good amount of time and lots and lots of AA epoxy.

How's $20 and I'll pay for shipping back?

Click to expand...

Ok, Well, Its a deal! or.. ill take it? wait.. this is my thread.. sold? who? anyway....
You can talk to goldserve about any details, THANKS GOLDSERVE!!
IssacHayes, ill pm you with more details. Thank you!!
- :candle: :huh2: :rock:

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

IsaacHayes,

PM sent! Thank you

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

55mm=over 2" in diameter!!! Do you mean 5.5mm?

Goldserve: Ah I get it, like in this picture? Is the led negative common ground? Does the screw terminal one work ok to just solder to instead?

1. 0.55" (13.96mm) Sammie size board, 1.6mm thick

better?

i just copied what i had in my paypal, anyway... that sounds more like it!

you see why i cant build things right?

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

IsaacHayes said:

55mm=over 2" in diameter!!! Do you mean 5.5mm?

Goldserve: Does the screw terminal one work ok to just solder to instead?

Click to expand...

i was joking about my error in stating the size,

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

IsaacHayes said:

55mm=over 2" in diameter!!! Do you mean 5.5mm?

Goldserve: Ah I get it, like in this picture? Is the led negative common ground? Does the screw terminal one work ok to just solder to instead?

Click to expand...

I'm not quite getting what you mean. The LED -'ve is a common ground so you can use that. Screw terminals? :huh2:

I was saying, if it was 55mm, (really big) it would need screw terminals.

Its alot smaller, so instead all ive done is make a mess of nice people trying to give a hand.

IsaacHayes, ive sent you bi polar PM'S. Please only read the last one sent. Sorry for the confusion, i was sending things back and forth and got confused. Anyway, .... Thanks again

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

PM replied. I answered all my questions. Good thing you were joking on the screw thing, I was at a loss to find any mention of them! I have a dremel to clearance the e-heatsink for the postive pcb hole.

Let me know. If I don't respond, it's cause I left to go to pump some iron!

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

Watch it....the Aleph ES-CANS are very very tough...i find a hand squared file works better than my dremel. Maybe I don't have the right bit....

IsaacHayes said:

PM replied. I answered all my questions. Good thing you were joking on the screw thing, I was at a loss to find any mention of them! I have a dremel to clearance the e-heatsink for the postive pcb hole.

Let me know. If I don't respond, it's cause I left to go to pump some iron!

Click to expand...

Re: HELP! WTB: Build me an Aleph Flupic Light Engine, i have all the parts!!

I'll use a hax-saw to start the slot like the ground slot as always, then enlarge it. No worries. All PM's replied as of now. Off to the gym before they close!