KingFootGA
Newly Enlightened
- Joined
- Aug 28, 2002
- Messages
- 6
Im a newbie, and i have decided that just like every other one of my flashlights, stock isn't good enough. Now im gonna do a direct drive luxeon star conversion in my "dim" 3d mag, but have one question: is there a way to do the conversion wile remaining a level of focusability? I dont want a flood, just a spot, and a medium spot to low flood? like on the stock mag when the black hole disappears on a wall 10 feet away, if u have one. Any input is greatly appreciated.
Thanks
Greg Lightfoot
KingFootGA
_____________________________
My flashlights:
CMG Infinity w/o black dot, a polished silver reflector, and a lens covering.
Homemade 40 white led 6 d cell with duct tape covering
Mini mag with a 2watt bulb
Everready 6 volt spot lantern flashlight with a 6v 25watt brinkmann bulb
Brinkmann Maxmillion II modified to accept a 300watt offroad light (has to be run off a specail connector directly from a car battery, but is VERY powerful!! probalby 5,000,000 Cp
Soon to be Mag 3d direct drive Luxeon
Thanks
Greg Lightfoot
KingFootGA
_____________________________
My flashlights:
CMG Infinity w/o black dot, a polished silver reflector, and a lens covering.
Homemade 40 white led 6 d cell with duct tape covering
Mini mag with a 2watt bulb
Everready 6 volt spot lantern flashlight with a 6v 25watt brinkmann bulb
Brinkmann Maxmillion II modified to accept a 300watt offroad light (has to be run off a specail connector directly from a car battery, but is VERY powerful!! probalby 5,000,000 Cp
Soon to be Mag 3d direct drive Luxeon