Help me build a Mag85

ac0311

Newly Enlightened
Joined
Dec 28, 2003
Messages
39
Been doing more research & am considering a BP 1185 w/12AANimh=14.4v
Any other suggestions for a brighter bulb that can handle 14.4v? Am concerned w/instaflash. Would using a PR based bulb & stock Mag switch be better, since their is more resistance. How long should one wait before turning it on after a full charge?
Plus what do you all think of the Modmag 12AA carrier, will it fit a stock body 3D.
I've got a 4D as well, any AA carriers for these to use a brighter bulb than the 1185. I calculate 16AANimh=19.2v using 4AA carrier x4 or a 3AA carrier x4=14.4v.
For batteries, okay to use the Tenergy batteries from the Battery Junction?
Thank you all again for your help.
 

wquiles

Flashaholic
Joined
Jan 10, 2005
Messages
8,459
Location
Texas, USA, Earth
I would really encourage you to look into the regulated options being available now from AWR and Winny ;)

EDIT: Link included.

Will
 
Last edited:

Geologist

Enlightened
Joined
Mar 2, 2005
Messages
822
Location
Earth
the WA1185 cannot handle that much voltage - I think the max is ~10.5 volts (9XNiMH).

pm me if you need parts, I was about to post a "85 kit" with everything except the Maglight and possible battery holder.
 
Top