Searching for 3 AA MM tube

I've seen a few posts referring to the addition of a 3rd AA battery to the MM using retro'd with a BB500 LS.
Who carries a body (Tube) extension or a new body that would accomodate 3 AA's?

Have a '5W LS' and Happy Holiday!

HeavyArmor

I beieve that one of our members could make you an extension tube for your torch..he has a CNC lathe! I just can't remember who it was...
You need to specify the diameter, length and thread type.
...Or, send him the torch!

CNC Dan is the fellow to talk to. He's done some of these adapters, and people seem happy with them.

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I had to jump in here. This is my first post to
the group so I hope I'm doing this right.
Running around on the web, I came across a site
that has a metal 3AA body. It's located at
www.4ledflashlights.com
I have no idea if these are well made or just
junk, perhaps someone else might be familiar
with them.

Ken W

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com>
Comment: http://www.keyserver.net/ Key ID: 0x58798E57

iQA/AwUBPgGjTec3lgvFfN9REQKphQCeJ4WWgZlpwXli0VHfn5HHCKzi310AnRKb
YnG14pSzJQ9HiG844vpc5umK
=mhCY
-----END PGP SIGNATURE-----

Originally posted by HeavyArmor:
I've seen a few posts referring to the addition of a 3rd AA battery to the MM using retro'd with a BB500 LS.
Who carries a body (Tube) extension or a new body that would accomodate 3 AA's?

HeavyArmor

Click to expand...

<font size="2" face="Verdana, Arial">I made the extention tube. I intend to make a bunch more as soon as I can, but I am very bussy at work right now and can't sneek in one of my own projects.

When I do I will run off about 50 of these(or more) and offer them to CPF members after contacting people that have e-mailed me.

I need to be running a job that uses 3/4" aluminium and will run late so I can get to my own stuff.

Originally posted by CNC Dan:
</font><blockquote><font size="1" face="Verdana, Arial">quote:</font><hr /><font size="2" face="Verdana, Arial">Originally posted by HeavyArmor:
I've seen a few posts referring to the addition of a 3rd AA battery to the MM using retro'd with a BB500 LS.
Who carries a body (Tube) extension or a new body that would accomodate 3 AA's?

HeavyArmor

Click to expand...

<font size="2" face="Verdana, Arial">I made the extention tube. I intend to make a bunch more as soon as I can, but I am very bussy at work right now and can't sneek in one of my own projects.

When I do I will run off about 50 of these(or more) and offer them to CPF members after contacting people that have e-mailed me.

I need to be running a job that uses 3/4" aluminium and will run late so I can get to my own stuff.</font><hr /></blockquote><font size="2" face="Verdana, Arial">Dan,

When you get around to this, I'd like a bunch of them. What do you charge for them?

Wayne J.