WAVE_PARTICLE
Flashlight Enthusiast
Up for grabs is the brightest LED light in my collection. The output on this sucker is enough to make your jaw drop and leave you smiling all night. It is driven at 750mA using a new converter and new XX1T LuxV (installed by Wayne). Overall output is higher than my WX0S SFTH Tower Module by ArcMania (driven at 1000mA) and higher than my SureFire U2 (driven at 860mA). The output also exceeds that of the WW0T HD45 that I used to have by quite a margin. The throw is outstanding and keeps up with my Aleph 3.
It runs on 1x18650 (my preferred configuration) as well as 2xCR123a. DO NOT USE WITH RCR123's.....trust me on that one. Runtime is impressive. On full blast, you should get about an hour on 2xCR123a's and more than 1 hour on 1x18650. On low, which is still pretty bright, you should get more than 8 hours on 2xCR123a's and way more than 8 hours on 1x18650. No reverse polarity protection, so be careful when changing batteries.
Beam quality is typical McGizmo buttery smooth style. Although it is classified as an X1 tint, I would say that it is 60% X1, 40% W0......so in terms of tint, this is a lottery winner. My UX1K 27LT has a much more pronounced X1 tint.
In brand-new condition and less than 30 mins total runtime on the new converter and emitter. I'll post pics later.
You guys all know how rare these X-bins are. I really don't want to sell this one...but I've lost a bit of self-control over the past week and bought one too many lights.... I'll leave it to fate to see if it sells. If it doesn't, then that's good news for me and I'm keepin it!!! :devil:
PRICE: $300 including shipping. Paypal (+3%)
Thanks for looking!
EDIT: will include a protected 18650 Li-ion.
:thumbsup: WP
AS PROMISED, HERE ARE SOME PICTURES OF THE LIGHT:
Here she is with other similar sized lights:
Closeup #1:
Closeup#2:
Closeup #3:
Here's the LED Positioning inside the reflector. As you can see, it is perfectly centered! Good Job Wayne!!!!
If there is anything wrong with this light, it is the fact that there is a tiny, tiny area that is missing some anodizing....but I received it new like this. It can be easily hidden with a Sharpie pen.
I'll see if I can get some comparative beamshots up shortly.
Thanks!!
It runs on 1x18650 (my preferred configuration) as well as 2xCR123a. DO NOT USE WITH RCR123's.....trust me on that one. Runtime is impressive. On full blast, you should get about an hour on 2xCR123a's and more than 1 hour on 1x18650. On low, which is still pretty bright, you should get more than 8 hours on 2xCR123a's and way more than 8 hours on 1x18650. No reverse polarity protection, so be careful when changing batteries.
Beam quality is typical McGizmo buttery smooth style. Although it is classified as an X1 tint, I would say that it is 60% X1, 40% W0......so in terms of tint, this is a lottery winner. My UX1K 27LT has a much more pronounced X1 tint.
In brand-new condition and less than 30 mins total runtime on the new converter and emitter. I'll post pics later.
You guys all know how rare these X-bins are. I really don't want to sell this one...but I've lost a bit of self-control over the past week and bought one too many lights.... I'll leave it to fate to see if it sells. If it doesn't, then that's good news for me and I'm keepin it!!! :devil:
PRICE: $300 including shipping. Paypal (+3%)
Thanks for looking!
EDIT: will include a protected 18650 Li-ion.
:thumbsup: WP
AS PROMISED, HERE ARE SOME PICTURES OF THE LIGHT:
Here she is with other similar sized lights:
Closeup #1:
Closeup#2:
Closeup #3:
Here's the LED Positioning inside the reflector. As you can see, it is perfectly centered! Good Job Wayne!!!!
If there is anything wrong with this light, it is the fact that there is a tiny, tiny area that is missing some anodizing....but I received it new like this. It can be easily hidden with a Sharpie pen.
I'll see if I can get some comparative beamshots up shortly.
Thanks!!
Last edited: