RCatR
Enlightened
From what I have read I can take an E2D, an Ecan from the shoppe, a K2, and a aleph tailcap to put together my dream light?
Would all these be compatible?
Would all these be compatible?
Is this possible?
- Thread starter RCatR
- Start date
Help Support Candle Power Flashlight Forum
MorpheusT1
Flashlight Enthusiast
The Ecan will not fit in a E-series head.
You need a Aleph head for that.
Benny
You need a Aleph head for that.
Benny
jtice
Flashaholic
Actually, I think hes correct.
The Ecan is the bottom part that the converter is potted into,
http://theledguy.chainreactionweb.com/product_info.php?products_id=188
the E-Sink sits on top that.
http://theledguy.chainreactionweb.com/product_info.php?products_id=266
The hole in the E series head also has to be drilled out larger to let the led fit.
~John
The Ecan is the bottom part that the converter is potted into,
http://theledguy.chainreactionweb.com/product_info.php?products_id=188
the E-Sink sits on top that.
http://theledguy.chainreactionweb.com/product_info.php?products_id=266
The hole in the E series head also has to be drilled out larger to let the led fit.
~John
Another alternative is to punch a .750" hole all the way through the head, chase the 13/16"x20 threads a bit further into the head with a tap and then install a light engine with a McR18 or IMS 17. I think the mod HERE inspired the E-screw/ES-Can seen in its infancy HERE which evolved into a new set of heads which became the start of the Aleph series. There has been a lot of aluminum consumed since then so my memory may be off but I think this is correct. :thinking:
RCatR
Enlightened
McGizmo said:
that is EXACTLY what I plan on doing, except with a K2 and different tailcap
thanks!
RCatR
Enlightened
AW, just to make things clear that is an unmodified E-Sink installed in a E2D with bored out reflector?
I'm trying to plan this mod out perfectly before I start wasting money on the wrong parts...
I'm trying to plan this mod out perfectly before I start wasting money on the wrong parts...
RCatR
Enlightened
Okay so here we go on the shopping list:
E2D Head
Fraen Narrow
K2
E-Sink
DB1000
E2x Body
McClicky Switch
McTC Tailcap Natural (w/boot)
RCR123 Kit
Does anyone see any incompatibilites with my plan?
E2D Head
Fraen Narrow
K2
E-Sink
DB1000
E2x Body
McClicky Switch
McTC Tailcap Natural (w/boot)
RCR123 Kit
Does anyone see any incompatibilites with my plan?
Last edited:
