Klarus        
Results 1 to 3 of 3

Thread: BUILDING TW4+POWERIZER GOOD BATTERY?

  1. #1
    Flashaholic*
    Join Date
    Jan 2006
    Location
    upstate ny
    Posts
    521

    Default BUILDING TW4+POWERIZER GOOD BATTERY?

    I looked at batteryspace.com and they say the RCR 123 are only good to 1.3A(to bad i saw this AFTER I ordered)will they be OK?

  2. #2
    Moderator
    Join Date
    Feb 2003
    Location
    CA
    Posts
    11,876

    Default Re: BUILDING TW4+POWERIZER GOOD BATTERY?

    I have used a single batteryspace.com's 650mAh RCR123 Powerizer to power a KL4, and they work just fine. They can handle more than 1.3 amps, but you will find that 1.3amps is just about what the KL4 will need for good regulation. Remember that you are dealing with unprotected RCR123's, so as soon as the light dims, switch out the battery. Dimming will occur before the battery is too depleated. I also use 2 of these Powerizers to power my A2.

    Bill

  3. #3
    Flashaholic*
    Join Date
    Jan 2006
    Location
    upstate ny
    Posts
    521

    Default Re: BUILDING TW4+POWERIZER GOOD BATTERY?

    Thanks bullzeyebill

    This light is going to just be a (WOW did all that light come from that little light type thing).I use the L4 for work in stock form with AW 17670's.

    DON

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •