• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired (CLOSED) 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

Status
Not open for further replies.

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,527
Location
California
[size=+3]
2Nd Run CLOSED​
[/size]

4AA002.jpg

1DMg008.jpg


Hi folks,
Here is 2Nd run of 4AA in 1D M*g
Finally the brightest 1D rechargeable flashlight is ready to ship.
Body is shortened to 1D and bored out in 4 slots to accept 4 AAs of any kind and any capacity.
Outside body is cross machined for great look and sure grip. Head is also finned for better heat dissipation. Completly deanodized, polished and reanodized in hard type III gun metal grey color.
Battery holder designed to accept 4AAs (cunsumer or flat top) which are slightly gapped to avoid shortage in case battery cover is torn. It has extended charging jack to recharge without removing tail cap. You can also recharge the pack out of flashlight or simply remove batteries to recharge individualy. This battery holder has very low resistance and capable of high drain bulbs. Center pin of charging jack is positive and I will include a male charging jack too.
Bulb options: Axial fillament potted 4 volt, 3.5A halogen or potted WA1319
I recommend to use axial 4 volt for maximum brightness or WA1319 for decent run time.
This flashlight comes with stock reflector, lens and 3 cell bulb. It is highly recommended to use aluminum reflector and boro lens when using high power bulbs.
Using 4 volt axial bulb will out throw stock MC with much nicer beam shape due to it's axial (vertical) short fillament.
Price: 1D M*g with battery holder $120
Potted 4 volt axial bulb $18
Bi pin 4 volt axial bulb $18
Potted WA1319 $9
Bi pin WA1183 $9
SMO, MOP or HS Dual function reflector $25 each
Boro lens $5.50
Shipping $8 for 1 set and $10 for 2 sets in States.
Shipping $12 for international destination.
Paypal: DO NOT PAY
Please pick an available and valid number, post your order here followed by Paypal and indicate detail of your order and your CPF handle in Paypal.
Example: :paypal: for #33 HA 1D
Please PM for different type of payment.
Any comment welcome.
-------------------------
#1 HA 1D M*g redbird paid shipped
#2 HA 1D M*g cmacclel paid shipped
#3 HA 1D M*g Lips paid shipped
#4 HA 1D M*g bobbo paid shipped
#5 HA 1D M*g LuxLuthor paid shipped
#6 HA 1D M*g Rommul paid shipped
#7 HA 1D M*g jefft paid shipped
#8 HA 1D M*g Nvr2brt paid shipped
#9 HA 1D M*g rdh226 paid shipped
#10 HA 1D M*g ZeissOEM2 paid shipped
 
Last edited:

redbird

Enlightened
Joined
Dec 25, 2000
Messages
258
Location
SW lower Mi USA
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

Wooo Hooo. Finally. I have been wanting one of these ever since I saw them.

I am in for sure. But, before I finalize I need to know what type of reflector is being offered? HS, LS, etc.

PP standing by will finalize when I read the reply.

redbird
 

redbird

Enlightened
Joined
Dec 25, 2000
Messages
258
Location
SW lower Mi USA
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

OK
1 D M*G 120
1 axial 18
1 1319 9
Boro lens 5.50
Dual reflector 25.00 MOP

shipping

PP to be sent
 
Last edited:

rdh226

Enlightened
Joined
May 2, 2006
Messages
315
Location
Nashua, NH, USA
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

I'll take #9, HS reflector, 2 x Potted axial, 2 x potted WA1319, 1 boro lens.

PayPal follows.

-RDH
 

cmacclel

Flashlight Enthusiast
Joined
Jul 15, 2003
Messages
5,018
Location
Sweden
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

I'm in for one E-Mail sent.

Thanks Mac
 

jefft

Enlightened
Joined
Aug 30, 2005
Messages
341
Location
Cupertino, CA
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

Sigh........I'll take #7 with 2 potted axial bulbs. Paypal on its way.

FM, I think you should at least let me know what you're doing with all of my money that I'm sending you.
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,527
Location
California
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

jefft said:
FM, I think you should at least let me know what you're doing with all of my money that I'm sending you.
Spending for next project to take even more money from you. :D
 

Lips

Flashlight Enthusiast
Joined
Mar 14, 2005
Messages
1,457
Location
Louisiana - USA
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

I'll take #3

Price: 1D M*g with battery holder $120
Potted 4 volt axial bulb $18
Ship $8

Total $146


Paypal on the way
 

ZeissOEM2

Enlightened
Joined
Jan 29, 2005
Messages
911
Location
Norway
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

edit
 
Last edited:

jar3ds

Flashlight Enthusiast
Joined
Sep 12, 2005
Messages
1,988
Location
USA
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

dang... that is beautiful knurling/anodizing....

If I had a use for a 1D Mag I would buy this sucker in a heart beat!

:goodjob: FM!
 

LuxLuthor

Flashaholic
Joined
Nov 5, 2005
Messages
10,654
Location
MS
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

Been a while since I have seen something this nice from you Varooj !!!!

I'll send PayPal, but have two questions that will influence what I should get.

First, I have some extra reflectors from the other Maglites I got from you, which are the smaller openings for the typical WA 1185 bulbs...so not sure if the 4 volt axial bulb will fit that size hole, or if I need one of these reflectors....and if so, which would give the best throw with less filament artifact?

Second, any idea of the lumen output of these two bulb choices, and a rough idea of their lifespan so I know if I should get extra bulb(s)?

Reserve #5 Slot for 1D M*g with battery holder $120
4 x Potted 4 volt axial bulb $72
MOP $25

Boro lens $5.50
Shipping $8
-------------------------
Total $194.50

Added another $36 for 2 more Bulbs.

:paypal:
 
Last edited:

bobbo

Newly Enlightened
Joined
Sep 9, 2004
Messages
88
Location
Henderson, Nevada
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

#4 1-D
1 x 4V. axial bulb
3 x WA 1319 bulbs

Thanks again Varooj

:paypal:
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,527
Location
California
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

jar3ds,
You will have a use for it.
---
LuxLuthor,
Axial bulb will not fit in small opening reflector unless you ream it out.
I don't have exact spec of axial bulb but it is brighter than TL-3 using H1499 and 2x17500 and it throws farther with MOP reflector.
For nice beam shape and decent throw, MOP is a good choice unless it you like larger beam and wall of light which HS will work best.
 

Rommul

Enlightened
Joined
May 23, 2005
Messages
600
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

I had promised to buy two of these in the old thread but expected them to be priced closer to the last run (didn't know they would be this nice).

Anyway I still want this. My paypal won't be cleared for another day or so. Can I reserve #6 till then?
 

Nvr2brt

Newly Enlightened
Joined
Apr 11, 2006
Messages
16
Location
"More Than A Mile High"
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

I'll have #8 HA 1D M*g with:

1D M*g with battery holder = $120
2 - Potted 4 volt axial bulb $18 = $36
2 - Boro lens $5.50 = $11
1 - SMO Dual function reflector = $25
Shipping for 1 set = $8

Total = $200, PayPal sent!
 

maddog

Enlightened
Joined
Feb 18, 2004
Messages
200
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

it looks like they are all gone already? man in less then a day. wow!

is it possible for me to still get one of these cool lights?

let me know.

thanks,
brandt
 

missionaryman

Enlightened
Joined
Oct 20, 2005
Messages
955
Location
Sydney, Australia
Re: 2Nd run 1D M*G+4AA to D BATTERY HOLDER+AXIAL 4 VOLT

I think there needs to be another run of these - could you time it for the 7th January so I can get a cool birthday present...
 
Status
Not open for further replies.
Top