wquiles
Flashaholic
Custom McG45's for sale - updated ...
OK, had some time to look at everything today. My apologies to everyone for not updating this sooner
Since I can only build 4 complete lights (unless I can get more 45mm reflectors), I am going to give preference to those folks in the main McG45 thread. This is the list of folks interested (I did my best to order based on TimeStamp on thread and on PM's):
- cue003 - asked to be skipped
- Nemul - asked to be skipped
- jdriller - asked to be skipped
- dksd39 - asked to be skipped
- gl22man - asked to be skipped
- nanotech17 - could not get a hold of
- MSaxatilus - one of the custom 1C's "sold"
- Christoph - - one of the custom 1C's "sold"
- Nebula - got the MM 2xC
- ZeissOEM2 - got the last light!
The list is closed for now.
These HAIII 2xC (or 1xC) lights will be approx. $265 depending on body, LED, driver (instead of DD), etc. These lights, as everything I sell, includes shipping/insurance CONUS.
Here are some pictures of the prototype for sale:
Here is a picture of the additional HAIII hosts. Going left to right, the second light, the third light, and the last light are the additional bodies offered for sale.
FL12, FM HAIII 2C (for sale), MM 2C HAIII (for sale), FM 1.5D, Modamag 1D, MM HAIII 1C (for sale):
Additional pictures of the FM HAIII host (the Prototype) and of the 2xC HAIII by MM. The 2xC done by MM has (like the custom 1C's) the extra knurling cuts in the grip area that I did on my own lathe
MM is the darker one, shown here in the left:
FM:
MM:
FM:
MM:
1) "The Prototype", as shown in above thread in great detail, which is 2xC, runs from 2x18650 cells, DD with a small resistor and a W-bin 5W LED = $265.00 ($285 with any driver). Completed and ready to ship.
2) (SOLD) I have another 2xC HAIII body from MM, that I can build right now also with a DD solution, also build with a W-bin 5W LED = $275.00 ($295 with any driver). Waiting to be built.
3) (SOLD) I have one of the FM custom finned 2X HAIII (includes the normal and the deep tailcap ) that I can also build DD with a W-bin 5D LED = $300.00 ($320 with any driver). Waiting to be built.
4) (SOLD) I have TWO custom 1xC HAIII bodies from MM, that I could build a DD solution with a 3W U-bin LED = $255.00 ($275 with any driver). Waiting to be built.
Basically, each person going down the list will have first option. Once that person decides, the next person will have second option, and so on. Whatever does not sells after these folks have a chance to buy/not-buy, will be offered for sale to the general membership. I hope this is fair to everyone
No need to send money yet. I just need to "know" from that interest list who wants what. Then we can worry about the money via PM's
Will
OK, had some time to look at everything today. My apologies to everyone for not updating this sooner
Since I can only build 4 complete lights (unless I can get more 45mm reflectors), I am going to give preference to those folks in the main McG45 thread. This is the list of folks interested (I did my best to order based on TimeStamp on thread and on PM's):
- cue003 - asked to be skipped
- Nemul - asked to be skipped
- jdriller - asked to be skipped
- dksd39 - asked to be skipped
- gl22man - asked to be skipped
- nanotech17 - could not get a hold of
- MSaxatilus - one of the custom 1C's "sold"
- Christoph - - one of the custom 1C's "sold"
- Nebula - got the MM 2xC
- ZeissOEM2 - got the last light!
The list is closed for now.
These HAIII 2xC (or 1xC) lights will be approx. $265 depending on body, LED, driver (instead of DD), etc. These lights, as everything I sell, includes shipping/insurance CONUS.
Here are some pictures of the prototype for sale:
Here is a picture of the additional HAIII hosts. Going left to right, the second light, the third light, and the last light are the additional bodies offered for sale.
FL12, FM HAIII 2C (for sale), MM 2C HAIII (for sale), FM 1.5D, Modamag 1D, MM HAIII 1C (for sale):
Additional pictures of the FM HAIII host (the Prototype) and of the 2xC HAIII by MM. The 2xC done by MM has (like the custom 1C's) the extra knurling cuts in the grip area that I did on my own lathe
MM is the darker one, shown here in the left:
FM:
MM:
FM:
MM:
1) "The Prototype", as shown in above thread in great detail, which is 2xC, runs from 2x18650 cells, DD with a small resistor and a W-bin 5W LED = $265.00 ($285 with any driver). Completed and ready to ship.
2) (SOLD) I have another 2xC HAIII body from MM, that I can build right now also with a DD solution, also build with a W-bin 5W LED = $275.00 ($295 with any driver). Waiting to be built.
3) (SOLD) I have one of the FM custom finned 2X HAIII (includes the normal and the deep tailcap ) that I can also build DD with a W-bin 5D LED = $300.00 ($320 with any driver). Waiting to be built.
4) (SOLD) I have TWO custom 1xC HAIII bodies from MM, that I could build a DD solution with a 3W U-bin LED = $255.00 ($275 with any driver). Waiting to be built.
Basically, each person going down the list will have first option. Once that person decides, the next person will have second option, and so on. Whatever does not sells after these folks have a chance to buy/not-buy, will be offered for sale to the general membership. I hope this is fair to everyone
No need to send money yet. I just need to "know" from that interest list who wants what. Then we can worry about the money via PM's
Will
Last edited: