NITECORE -- Keep Innovating        
Results 1 to 3 of 3

Thread: FM64 Beamshaper will fit a Kl6 head ?

  1. #1
    Flashaholic
    Join Date
    Jun 2006
    Location
    Australia, victoria
    Posts
    212

    Default FM64 Beamshaper will fit a Kl6 head ?

    I have the M3 and comparing it to the Kl6 head sizes flush against each other,its exactly samecircumfrence, there both scalloped and they actually join like a jigsaw puzzle.

    So this being the case the FM64 would fit on the KL6 head?

    As theres not much talk about the diffusers on led lights.
    Are diffusers useful on led lights?

    cheers fuzzy

  2. #2
    Flashaholic
    Join Date
    Jul 2004
    Location
    USA
    Posts
    381

    Default Re: FM64 Beamshaper will fit a Kl6 head ?

    the fuzz,

    No.

    The M3 head and the KL-6 head are both 1.62' in diameter and take the FM-14 beamshaper or FM-1x filter series. The FM-64 beamshaper or the FM-6x filter series go on the 1.47' heads of the M2/U2/KL-3/KL-5/K2 lights. The FM-34 beamshaper or the FM-3x filter series go on the 1.25' heads of the C2/Z2/6P/9P/G2 etc.

    Hope this helps,
    Flashdark sends.
    A flashdark is a device that projects a black circle upon (thereby obscuring) anything which is visually offensive. Surefire: E1e/KL1(2), E2L, E2e, E2C/P-61, KL2, KL3(1,2v3), KL4, L1-RD(1), L1-WH(1,2), L2(1), L4, L5, L6, G2, C2, U2, K2, M2, C3, M3, M3T, M6. Milkyspit: ML-1, MilkMite. Photon: Freedoms(WH/RD/TQ).

  3. #3
    Flashaholic
    Join Date
    Jun 2006
    Location
    Australia, victoria
    Posts
    212

    Default Re: FM64 Beamshaper will fit a Kl6 head ?

    thanks v much so ill buy a fm 14

    Thank you Flashdark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •