1) FiveMega big body light
Custom Heatsink (Stars are removeable)
3x XX1S Luxeon Stars (Nice warm white tint)
3X 18650 Holder
3x 31mm HyperLux V reflectors
Powered by the new MaxFlex
Currently the light is setup for 1200ma MAX and draws 2.6 amps.
If you plan on making this a user light, I'd drop the current down to 1000ma or lower.
tdurand has first dibs on this light
$750 delivered Parts alone for this light was close to $600! *SOLD*
2) Pewter Chopped "D" Mag
PTS2 Heatsink
3x UWOK Luxeon Stars
3x IMS 20mm reflectors
Flupic 3x Board provides 1amp to each star in burst mode
UCL Lens
FiveMega premium 3x17670 holder (4800Mah)
Host is Tri-Bored
Tailswitch
$275 Delivered *SOLD*
3) Purple Chopped "C" Mag
PTS2 Heatsink
3x SXOH Luxeon Stars
Fatman board set to 500ma
UCL Lens
3x IMS 20mm reflectors
McGizmo tailswitch in custom aluminum holder
Runs from 2, AW R123's for 50 minutes of runtime (Tested)
One star has a soldering iron mark on the dome. This has no effect on the beam or output.
$275 Delivered. I will not be making anymore "C" tailswitch mods there are to time consuming. *SOLD*
The Bunch
The Bunch II
The "X" heasink
The "X" MaxFlex setup
Tri UWOK light engine
Tri UWOK light engine II
Tri UWOK light engine III
Custom Heatsink (Stars are removeable)
3x XX1S Luxeon Stars (Nice warm white tint)
3X 18650 Holder
3x 31mm HyperLux V reflectors
Powered by the new MaxFlex
Currently the light is setup for 1200ma MAX and draws 2.6 amps.
If you plan on making this a user light, I'd drop the current down to 1000ma or lower.
tdurand has first dibs on this light
$750 delivered Parts alone for this light was close to $600! *SOLD*
2) Pewter Chopped "D" Mag
PTS2 Heatsink
3x UWOK Luxeon Stars
3x IMS 20mm reflectors
Flupic 3x Board provides 1amp to each star in burst mode
UCL Lens
FiveMega premium 3x17670 holder (4800Mah)
Host is Tri-Bored
Tailswitch
$275 Delivered *SOLD*
3) Purple Chopped "C" Mag
PTS2 Heatsink
3x SXOH Luxeon Stars
Fatman board set to 500ma
UCL Lens
3x IMS 20mm reflectors
McGizmo tailswitch in custom aluminum holder
Runs from 2, AW R123's for 50 minutes of runtime (Tested)
One star has a soldering iron mark on the dome. This has no effect on the beam or output.
$275 Delivered. I will not be making anymore "C" tailswitch mods there are to time consuming. *SOLD*
The Bunch
The Bunch II
The "X" heasink
The "X" MaxFlex setup
Tri UWOK light engine
Tri UWOK light engine II
Tri UWOK light engine III
Last edited: