For a project, I will need a complete working sandwich, incl. emitter.
[Urgent]
1) Overall diameter must be 0.55" (0.56" fine also).
2) Height may NOT exceed 0.24" (6mm) !! Less is better.
3) Sandwich must also be potted with Thermal Epoxy or similar
4) Needs to run from 1 cell (turn on with 3.0v-3.6v.)
5) Lux Flux/color does not matter, as long as it works !
6) Must consist of converter board (just ANY) and emitter board.
AS LONG AS IT WORKS.
Just need it for a small project.
Please post here, contact by PM or e-mail:
george (at) bombelman (dot) com
Many thanks !!
[Urgent]
1) Overall diameter must be 0.55" (0.56" fine also).
2) Height may NOT exceed 0.24" (6mm) !! Less is better.
3) Sandwich must also be potted with Thermal Epoxy or similar
4) Needs to run from 1 cell (turn on with 3.0v-3.6v.)
5) Lux Flux/color does not matter, as long as it works !
6) Must consist of converter board (just ANY) and emitter board.
AS LONG AS IT WORKS.
Just need it for a small project.
Please post here, contact by PM or e-mail:
george (at) bombelman (dot) com
Many thanks !!
