Fenix L2T w/CR123 body vs. P1 runtime graphs

B737Driver · Nov 16, 2006

Does anybody have a runtime/output graph of a L2T w/CR123 body and a P1 that they can share? I'm looking to get either the Fenix P1 or the Fenix L2T/CR123 body combo. Seeing a graph may make my decision a little easier. Planning to use it primarily to burn off CR123s, and also as a backup edc.

Thanks a lot,

B737Driver

TooManyGizmos · Nov 17, 2006

Yes .................... that would be interesting .

I'd like to see that also .
.

Mike89 · Nov 17, 2006

Look at the run time graph on Fenixstore for the P1. The L1T with modded body should be the same. Same battery, both 3 watt LED.

B737Driver · Nov 17, 2006

Mike89 said:
Look at the run time graph on Fenixstore for the P1. The L1T with modded body should be the same. Same battery, both 3 watt LED.

I'm not so sure about that. I think the runtime/output graphs would differ between the two lights. Just because the two lights are running on the same battery, powering the same 3 watt LED does not mean that they will produce the same curve, output, and runtime on a graph. I think there is more to it than that.

Mike89 · Nov 17, 2006

I wouldn't think it could be too far off.

Ritch · Nov 17, 2006

Last night I have tested the runtime of the LxT-123 combo. I took the brightest of my 3 LxT Heads (slightly brighter than my two P1) and a fresh SF123.
For brightness comparison I took a P1 to check, if and when the LxT-123 combo would diminish.

Result: 90 minutes of full brightness (a little brighter than the P1 and hotter too), than 30 minutes of slowly diminishing to exactly the low level brightness.

richard

VF1Jskull1 · Nov 17, 2006

you may want to search for forum member "chevrofreak" for runtime graphs. He may have those.

zapper · Nov 17, 2006

Chevrofreak has those graphs out there. I think they came out about the same but the LxT was just a hair brighter. My L2P/CR123 is just a shade dimmer but longer runtime and L2T/CR123 is a shade brighter with just a few minutes less runtime ~10-15 mins. Just keep searching...

EDIT: sorry, the info I have for both ROY and Chevrofreak have the L2P w/123.

Pumaman · Nov 17, 2006

flashlightreviews.com
p1 is brighter but 1:45 to 50% vs 2:45 to 50% with L2p w 123 body.

B737Driver · Nov 17, 2006

Pumaman said:
flashlightreviews.com
p1 is brighter but 1:45 to 50% vs 2:45 to 50% with L2p w 123 body.

Thanks Pumaman, but as the title says, I'm looking for a graph of the 3 watt L1T/L2T head with the CR123 body.

B737Driver · Nov 17, 2006

Ritch said:
Last night I have tested the runtime of the LxT-123 combo. I took the brightest of my 3 LxT Heads (slightly brighter than my two P1) and a fresh SF123.
For brightness comparison I took a P1 to check, if and when the LxT-123 combo would diminish.

Result: 90 minutes of full brightness (a little brighter than the P1 and hotter too), than 30 minutes of slowly diminishing to exactly the low level brightness.

richard

Thanks for the info. Richard.

Fenix L2T w/CR123 body vs. P1 runtime graphs

B737Driver

Newly Enlightened

TooManyGizmos

Flashlight Enthusiast

Mike89

Enlightened

B737Driver

Newly Enlightened

Mike89

Enlightened

Ritch

Enlightened

VF1Jskull1

Enlightened

zapper

Enlightened

Pumaman

Flashlight Enthusiast

B737Driver

Newly Enlightened

B737Driver

Newly Enlightened

Similar threads

Latest posts