MSaxatilus
Flashlight Enthusiast
For Sale: Milkyspit Baby Optimator!!!
Because I am in need of some cash for another project, I am offering this a Milkyspit modded KL3 (Old Style Bezel) for sale. It is been called by its creator, the Baby Optimator.
Here are the specs from another thread:
A modded old-style KL3 head containing a LuxI SXOH and customized McR27 reflector... this one's only driving the emitter at 350mA but by virtue of the emitter and reflector pumps out about 60 lumens and throws very well.
The hotspot is a little smaller and substantially more intense than the HDS.
Sidespill is roughly equal in brightness and a little larger in radius than the HDS sidespill. Runtime of this Baby Optimator on 3x123 primaries is an estimated 4 hours of bright output. There ought to be quite a bit of lower-level light even beyond this point. If using rechargeables, 2x17500's would be safest.
The light in its latest configuration is running off of 2xR123s in a L5 body. In this configuration, your runtime will be approximately 80-85% of the 2x17500s but in a much smaller package
There is a nice review of this light posted here (Post # 5):
http://candlepowerforums.com/vb/sho...557956#poststop
IMPORTANT NOTE: Please note that the light is shown with a SWO1 in the pic above. The sale here does not include the SWO1. It will include a stock M-series compatible twisty tailswitch instead.
ASKING $225 dollars, Shipped CONUS. International buyers please add $5
Price Reduced, Now only $165 dollars! ***SOLD***
***********************
Conditions:
1) First person to post "I'll take it" here in this thread takes priority.
2) Payment must be made via Paypal only. If you simply cannot pay by Paypal, please contact my privately and I can try to work something out on a case-by-case basis.
3) Pricing listed above includes shipping as indicated and I will accept CC payments. However, all Buyers must add 3% to the priced indicated to cover PayPal fees.
4) Shipping: For all items priced under $50 dollars the cost includes First Class shipping with DC. All items priced over $50 dollars the cost will include Priority Mail shipping with DC. In either case, the price does not include insurance or other mailing services. If you would like changes to your shipping (upgrades, insurance, signature confirmation, etc.) please PM me to work out any additional costs. I will not be held responsible for lost or stolen items.
5) The Buyer is hereby asked to remit to my PM subsequent any post of "I'll take it" within 24 hours. Several recent incidents have put me in a difficult and unwanted postion of being between an unresponsive buyer and the next individual in line. So I am asking you now, that if you cannot respond within 24 hours, please indicate in the thread publically or PM me of your intentions. Communication is king! If I do not hear from you, I will simply relist the item as "still available". No hard feelings.
Man, I feel like a lawyer!! What happened to the good ol days?!
Anyway, if you have any questions, feel free to PM me.
Thanks for looking,
MSax
(Please note, the light depicted in this sales thread DOES NOT include the SW01 pictured above. A M-Series twisty will be included in sale.)
Because I am in need of some cash for another project, I am offering this a Milkyspit modded KL3 (Old Style Bezel) for sale. It is been called by its creator, the Baby Optimator.
Here are the specs from another thread:
A modded old-style KL3 head containing a LuxI SXOH and customized McR27 reflector... this one's only driving the emitter at 350mA but by virtue of the emitter and reflector pumps out about 60 lumens and throws very well.
The hotspot is a little smaller and substantially more intense than the HDS.
Sidespill is roughly equal in brightness and a little larger in radius than the HDS sidespill. Runtime of this Baby Optimator on 3x123 primaries is an estimated 4 hours of bright output. There ought to be quite a bit of lower-level light even beyond this point. If using rechargeables, 2x17500's would be safest.
The light in its latest configuration is running off of 2xR123s in a L5 body. In this configuration, your runtime will be approximately 80-85% of the 2x17500s but in a much smaller package
There is a nice review of this light posted here (Post # 5):
http://candlepowerforums.com/vb/sho...557956#poststop
IMPORTANT NOTE: Please note that the light is shown with a SWO1 in the pic above. The sale here does not include the SWO1. It will include a stock M-series compatible twisty tailswitch instead.
ASKING $225 dollars, Shipped CONUS. International buyers please add $5
Price Reduced, Now only $165 dollars! ***SOLD***
***********************
Conditions:
1) First person to post "I'll take it" here in this thread takes priority.
2) Payment must be made via Paypal only. If you simply cannot pay by Paypal, please contact my privately and I can try to work something out on a case-by-case basis.
3) Pricing listed above includes shipping as indicated and I will accept CC payments. However, all Buyers must add 3% to the priced indicated to cover PayPal fees.
4) Shipping: For all items priced under $50 dollars the cost includes First Class shipping with DC. All items priced over $50 dollars the cost will include Priority Mail shipping with DC. In either case, the price does not include insurance or other mailing services. If you would like changes to your shipping (upgrades, insurance, signature confirmation, etc.) please PM me to work out any additional costs. I will not be held responsible for lost or stolen items.
5) The Buyer is hereby asked to remit to my PM subsequent any post of "I'll take it" within 24 hours. Several recent incidents have put me in a difficult and unwanted postion of being between an unresponsive buyer and the next individual in line. So I am asking you now, that if you cannot respond within 24 hours, please indicate in the thread publically or PM me of your intentions. Communication is king! If I do not hear from you, I will simply relist the item as "still available". No hard feelings.
Man, I feel like a lawyer!! What happened to the good ol days?!
Anyway, if you have any questions, feel free to PM me.
Thanks for looking,
MSax
Last edited:
