goldserve
Flashlight Enthusiast
Okay peeps, time to put new life into your JIL-CR2s, Exolions...
Thanks for vortechs and a few lab rats, I have figured out how I can provide this mod. The main challenges which lead to increased labour is the fact that 0.015" has to be removed from the back of the McR-18 reflectors and proper isolation of the led on the Flupic Emitter board. All those have been figured out now so here are the instructions. This will get VERY complicated.
*I will only be modding the new JCR LR and Intelli lights right now because they use the beautiful McR-18 reflectors that are made of metal*
Step 1:
Choose from the following options (all of the options below come with free shipping anywhere!):
Option 1: $45 - Flupic Sandwhich module /w P4 Seoul led
Option 2: $5 - Spacer ring for sandwhich module to upgrade JIL-CR2 LR series light
Option 3: $35 - Ship JIL-CR2 Intelli or Exolion to me, I mod reflector, replace led with Seoul P4
Option 4: $65 - Ship JIL LR or DD to me, I mod reflector, install Flupic module /w P4 led, and ring
Step 2:
Click On the paypal links below, depending if you pay by credit card or cash/bank transfer
Option 1 - Cash Paypal Credit Card (+3%)
Option 2 - Cash Paypal Credit Card (+3%)
Option 3 - Cash Paypal Credit Card (+3%)
Option 4 - Cash Paypal Credit Card (+3%)
*Please remember to put your JIL Serial number in the notes section for options 3 and 4
Step 3:
I will reply your e-mail if you choose Options 3 or 4 with my mailing address. I can no stress enough to declare GIFT and under $30. Otherwise, you will be responsible on the customs charged to me by the government. Also, I hope you agree that mail does get lost sometimes and there isn't very much I can do about it.
*EDIT: Sorry but i'm going away and no longer have access to a machine shop to mod reflectors. Option 3 and 4 will no longer be available but option 1 and 2 will be available for 1 more week.
Thanks for vortechs and a few lab rats, I have figured out how I can provide this mod. The main challenges which lead to increased labour is the fact that 0.015" has to be removed from the back of the McR-18 reflectors and proper isolation of the led on the Flupic Emitter board. All those have been figured out now so here are the instructions. This will get VERY complicated.
*I will only be modding the new JCR LR and Intelli lights right now because they use the beautiful McR-18 reflectors that are made of metal*
Step 1:
Choose from the following options (all of the options below come with free shipping anywhere!):
Option 1: $45 - Flupic Sandwhich module /w P4 Seoul led
Option 2: $5 - Spacer ring for sandwhich module to upgrade JIL-CR2 LR series light
Option 3: $35 - Ship JIL-CR2 Intelli or Exolion to me, I mod reflector, replace led with Seoul P4
Option 4: $65 - Ship JIL LR or DD to me, I mod reflector, install Flupic module /w P4 led, and ring
Step 2:
Click On the paypal links below, depending if you pay by credit card or cash/bank transfer
Option 1 - Cash Paypal Credit Card (+3%)
Option 2 - Cash Paypal Credit Card (+3%)
Option 3 - Cash Paypal Credit Card (+3%)
Option 4 - Cash Paypal Credit Card (+3%)
*Please remember to put your JIL Serial number in the notes section for options 3 and 4
Step 3:
I will reply your e-mail if you choose Options 3 or 4 with my mailing address. I can no stress enough to declare GIFT and under $30. Otherwise, you will be responsible on the customs charged to me by the government. Also, I hope you agree that mail does get lost sometimes and there isn't very much I can do about it.
*EDIT: Sorry but i'm going away and no longer have access to a machine shop to mod reflectors. Option 3 and 4 will no longer be available but option 1 and 2 will be available for 1 more week.
Last edited: