Sold/Expired FS: Aleph L.E

Expertly built by Chop
Virtually mint Wiz2-1000/TXOH

Definitely U-bin brightness.
$70=00

:bump:

I thought this was a good price

Back to the top.

Non-cree and non-seoul stuff has become incredibly hard to sell lately...
I tried to sell brand new DB and NG TX0H LE for $45 shipped lately with NO buyer :huh:

Good luck!

Just swap the emitters with Cree SSC and suddenly there will be a shortage...

Free
Cheers !

bombelman said:

Just swap the emitters with Cree SSC and suddenly there will be a shortage...

Free
Cheers !

Click to expand...

Yes .... thanks for reminding me - to all you modders you can just swap the
emitter - its still worth it just for the rest.

The emitters are only worth about $10 after all.

Will the reflector on any of the Aleph bezels need to be changed to accommodate the Cree?

BugLightGeek said:

Will the reflector on any of the Aleph bezels need to be changed to accommodate the Cree?

Click to expand...

From what I understand, it would be better to replace the luxeon with
an SSC-P4-U (Seoul) rather than a Cree-XRE .....

This would involve a shim, electrical isolation of the slug
and cutting the tabs off and this is relatively easy to do.

The Seoul L.E would then fit straight into an Aleph-1 or Aleph-3 head.

For an Aleph-2 with this setup, the McR20-Seoul from the Sandwich Shoppe
can be used or an ordinary McR20 will need a bit trimmed off the smaller
bit near the led.

A Cree would work with Aleph-2 or Aleph-3 heads but is not suitable
for Aleph-1. The reflectors for the Aleph-2 and Aleph-3 heads would
definitely need to be trimmed until the correct focal point is achieved.

Do the Aleph LEs fit into a Surefire E2E head?

The Aleph LE's are set up to be placed in Aleph heads that fit on E series bodies.

Bill

The Wiz2 would be perfect for a Cree or Seoul running a single LiIon.

Bill