whc
Enlightened
Just finished on modding my L1T with a Seoul P4 LED, the result was better than imagined, the SSC P4 LED just gives the L1T a whole new life.
The mod took several hours, did not do it the easy way, by just removing the old LED and replace it with the new one, no i used a SSC P4 on a "mini star " board/heatsink, and grinded the heatsink on the L1T and the mini board/heatsing to make it fit without any glue at all, just two screws and Artic Silver 5 Coumpound to connect the mini board to the L1T heatsink.
Here is some pictures of the final result:
The result was better than expected, since this is my first mod, I was prepared to have a defective L1T and no SSC P4 LED after a failed job. The LED is perfectly centred in the reflector.
Now the output coming from this flashlight now is just amazing, even better than expected.
L1T SSC P4 with 3.7v Li-Ion on High
L1T SSC P4 with 3.7v Li-Ion on High, 2-Stops Underexposed
L1T SSC P4 with 1.2v Ni-Mh on High
L1T SSC P4 with 1.2v Ni-Mh on High, 2-Stops Underexposed
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: L1D-CE with 3.7v Li-Ion on High
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: L1D-CE with 3.7v Li-Ion on High, 2-Stops Underexposed
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: M1 SSC P4 with 3.7v Li-Ion
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: M1 SSC P4 with 3.7v Li-Ion, 2-Stops Underexposed
The mod took several hours, did not do it the easy way, by just removing the old LED and replace it with the new one, no i used a SSC P4 on a "mini star " board/heatsink, and grinded the heatsink on the L1T and the mini board/heatsing to make it fit without any glue at all, just two screws and Artic Silver 5 Coumpound to connect the mini board to the L1T heatsink.
Here is some pictures of the final result:
The result was better than expected, since this is my first mod, I was prepared to have a defective L1T and no SSC P4 LED after a failed job. The LED is perfectly centred in the reflector.
Now the output coming from this flashlight now is just amazing, even better than expected.
L1T SSC P4 with 3.7v Li-Ion on High
L1T SSC P4 with 3.7v Li-Ion on High, 2-Stops Underexposed
L1T SSC P4 with 1.2v Ni-Mh on High
L1T SSC P4 with 1.2v Ni-Mh on High, 2-Stops Underexposed
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: L1D-CE with 3.7v Li-Ion on High
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: L1D-CE with 3.7v Li-Ion on High, 2-Stops Underexposed
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: M1 SSC P4 with 3.7v Li-Ion
Left: L1T SSC P4 with 3.7v Li-Ion on High, Right: M1 SSC P4 with 3.7v Li-Ion, 2-Stops Underexposed
Last edited:
