Nebula
Enlightened
I like quirky lights, so in keeping with my taste for the unusual, I asked Mirage_Man to take his lathe to a 2D Dorcy. Thank you Brian. 
The body has been cut to a 1D length and grooved. My plan is to mod the light with a single SSC, and a modified Mag reflector, using either the stock bulb holder/HS or a modified Hotlips HS. The stock bulb holder/HS is similar to the Hotlips HS, but without the heft (i.e., thinner). I also plan to use NiMHs (3AA -D, or 4AA -D) for power. If you have modded this particular Dorcy model I would like to hear your story. Tips and/or suggestions are appreciated. Thanks. Kirk
[/QUOTE]
The body has been cut to a 1D length and grooved. My plan is to mod the light with a single SSC, and a modified Mag reflector, using either the stock bulb holder/HS or a modified Hotlips HS. The stock bulb holder/HS is similar to the Hotlips HS, but without the heft (i.e., thinner). I also plan to use NiMHs (3AA -D, or 4AA -D) for power. If you have modded this particular Dorcy model I would like to hear your story. Tips and/or suggestions are appreciated. Thanks. Kirk
