ArmyTek        
Results 1 to 11 of 11

Thread: **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

  1. #1
    Flashaholic* EngrPaul's Avatar
    Join Date
    Sep 2006
    Location
    PA
    Posts
    3,679

    Thumbs up **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    I have two of these mods (to a brand new flashlight) to sell at the low price of $35 Paypal

    This price includes:
    • Wrist Strap,
    • Fresh Energizer lithium battery,
    • Priority shipping via USPS to a USA address.
    These two particular flashlights I have to sell accept a CR2 size battery only.

    I call them the "little firecracker" because once it has a Seoul P4-U, it's about as bright as a P1D-CE on high, but throws a nicer spot, has a smoother beam, and is smaller (more appropriate for a keychain.)

    See if the pictures below convince you.

    NOTE: The two that I have are slightly different tints. The one shown in the pictures below is relatively "cool" W0 tint. The other is "warmer" V0 tint, more "vanilla" in color. Please specify which tint you want (first buyer gets to choose).









    P1D-CE on left (low setting), Ultrafire on right


    P1D-CE on left (med setting), Ultrafire on right


    P1D-CE on left (high setting), Ultrafire on right


    UNDEREXPOSED VERSION
    P1D-CE on left (high setting), Ultrafire on right
    Last edited by EngrPaul; 04-07-2007 at 09:28 PM. Reason: Added "Paypal"

  2. #2

    Default Re: F/S: 2 ea. Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    RCR2 okay?
    "Trip the light fantastic..."

  3. #3
    Flashaholic* Pokerstud's Avatar
    Join Date
    Jul 2006
    Location
    Just West of the Superstitions
    Posts
    571

    Default Re: F/S: 2 ea. Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    for the " WO " tint

  4. #4
    Flashaholic* EngrPaul's Avatar
    Join Date
    Sep 2006
    Location
    PA
    Posts
    3,679

    Default Re: F/S: 2 ea. Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    I had one person report they run it with RCR2 sucessfully, but that's third-hand information. I cannot say for sure.

  5. #5
    Flashaholic* EngrPaul's Avatar
    Join Date
    Sep 2006
    Location
    PA
    Posts
    3,679

    Default Re: F/S: 2 ea. Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    Thanks Robert, you get the W0 tint

  6. #6

    Evilgrin07 Re: F/S: 2 ea. Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    I''ll take the VO. Thanks!
    Last edited by martonic; 04-07-2007 at 09:25 PM.
    "Trip the light fantastic..."

  7. #7
    Flashaholic
    Join Date
    Aug 2006
    Location
    S.E. Florida
    Posts
    281

    Default Re: **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    Damn, that's what I get for going out last night. Instead of diligently watching the B,S,T, forum. At that price, I would've bought both without hesitation.

    I've been very pleased with my "EngrPaul Seoul'd YNKA".

    Mine has been going strong for about a month, with an UltraFire 3.0v RCR2. No issues to report, as far as issues with the emitter.

    The only downside is battery management. As soon as you see diminished output, change/recharge the battery. I killed one battery by running it for a couple minutes, after the output had stepped down.

    I've also tried AW's 3.7, again no issues. But admittedly, I didn't use a freshly charged battery. The battery read 3.8v

    My goal with the 3.7v was more to answer the question of fitment.
    Guns, Cigars & Forced Injection Cars

  8. #8
    Flashaholic* EngrPaul's Avatar
    Join Date
    Sep 2006
    Location
    PA
    Posts
    3,679

    Default Re: **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    What surprises me is these flashlights have no thermal compound whatsoever stock. There's a Luxeon sitting in a aluminum pocket, and the pocket has a tit at the middle due to incomplete machining, which keeps the emitter away from seating against the aluminum.

    When I modify these, I remove the emitter, dremel off the tit, use thermal epoxy to install a .015" copper disc, and then install the emitter with more thermal epoxy. This is why you get good performance over time from the emitter.

  9. #9

    Arrow Re: **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    Excellent mod. Nice and bright on a primary, but it "really shines" on an RCR2 - and it tailstands with the lanyard attached - thank you very much!
    "Trip the light fantastic..."

  10. #10
    Flashaholic* EngrPaul's Avatar
    Join Date
    Sep 2006
    Location
    PA
    Posts
    3,679

    Default Re: **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    Thanks for the feedback. The output to size ratio is extremely good

  11. #11
    Flashaholic* Pokerstud's Avatar
    Join Date
    Jul 2006
    Location
    Just West of the Superstitions
    Posts
    571

    Default Re: **SOLD** Ultrafire WF-606B with Seoul P4-U (CR2) with Pix

    Paul, finally got mine today, after the USPS jacked me around for three days. No problems from you, as you ship very quickly with excellent service.

    This little " fire cracker " is awesome. This is my first CR2 light, and I can't believe the light coming from something smaller than a P1. Your mod is perfect, beautifully centered and definitely a WO tint as described.

    Another master piece from the guru of Seoullllll...........................

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •