TranquillityBase
Flashlight Enthusiast
- Joined
- Jun 12, 2005
- Messages
- 3,741
I know, I know, it's not a Cree or a Seoul, but it is a very nice NG750 driven TWOK Lux III. The Ti tailcap is the standard McE footprint, so a two level switch will work perfectly.
I do not know the builder of the LE...the builder did engrave NG750, 3.6V, on the lip of the can...and TWOK on the side of the can, with purple paint covering solder joints on the board.
The LE has been in and out of a few lights, but it's no worse for wear, and the head, body, and tailcap are in perfect condition.
Up front...the head is a Ti McR18 head, body is a SF Winelight E1W, and the Ti tailcap has a McClicky switch installed.
At 750ma drive level, I don't think the head will get screaming hot, but I still wouldn't recommend running the light unattended.
$275 delivered
TB
I do not know the builder of the LE...the builder did engrave NG750, 3.6V, on the lip of the can...and TWOK on the side of the can, with purple paint covering solder joints on the board.
The LE has been in and out of a few lights, but it's no worse for wear, and the head, body, and tailcap are in perfect condition.
Up front...the head is a Ti McR18 head, body is a SF Winelight E1W, and the Ti tailcap has a McClicky switch installed.
At 750ma drive level, I don't think the head will get screaming hot, but I still wouldn't recommend running the light unattended.
$275 delivered
TB
Last edited:
