TranquillityBase
Flashlight Enthusiast
- Joined
- Jun 12, 2005
- Messages
- 3,741
Built-up head only
It's the head shown in the first photo
McR18, trimmed for the Seoul (P4 USV0I, from Photonfanatic)
The LE is a Wiz2 700, built by the LE master, Icarus...The can is shimmed, not the emitter...I have a .030" Ti ring, light press fit to the can...The emitter shim isn't necessary for the McR18, and McR20, the lip of the reflector sits on the black plastic part of the emitter, the can shim is needed for proper spacing, head to cell tube.
$245 delivered
McR20S
McR18 trimmed for the Seoul
GITA o-ring
Standard bezel ring
TB
It's the head shown in the first photo
McR18, trimmed for the Seoul (P4 USV0I, from Photonfanatic)
The LE is a Wiz2 700, built by the LE master, Icarus...The can is shimmed, not the emitter...I have a .030" Ti ring, light press fit to the can...The emitter shim isn't necessary for the McR18, and McR20, the lip of the reflector sits on the black plastic part of the emitter, the can shim is needed for proper spacing, head to cell tube.
$245 delivered
McR20S
McR18 trimmed for the Seoul
GITA o-ring
Standard bezel ring
TB
Last edited: