NEXTORCH - 300 m long-shot E6        
Results 1 to 30 of 551

Thread: Multi-Sink

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,624

    Default Multi-Sink2

    It is time to build your own Mulit-LED Mag.
    Here is the "Adjustable Heat-sink2" to work with many reflectors & optics. ( Easier for SMALLER board base of cree/luxeon/Seoul )
    This version 2 make room for 17mm driver.
    Material: Aluminum
    Finishing: Bare

    A. Multi-Sink2 - Free shipping Worldwide

    $28 = x1 set
    $48 = x2 sets
    $64 = x3 sets





    D. XP-G Orange peel metal reflector Dia. 20mm x 17mmH. = US$9/pc (stock: 8)


    F. Connecting socket, 80C 300V 22AWG, 1 set = $1




    ----------------------------------------

    Paypal with your CPF handle and address to (11/2013)



    ----------------------------------------

    For Registered mail (Tracking), please add extra $4
    Registered mail is highly recommended.






    Just cut your "Star", wire them, put a paper (punch a hole & cut like a donut) isolate the Cree + & -, put thermal "gel" in between (not epoxy), insert the reflectors, seal the bezel, that all, easy?









    Direct Drive hints



    Poorman Multi-LED setup

    Enjoy your mod.
    Last edited by download; 01-19-2014 at 08:33 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •