the other night, i ran my SF TH SSC tower (DB1000) for about 15 min (w/ 2 x 3.7V Protected RCR123) and it quited on me all of a sudden.
i discovered that there is a crank on LED
so how can i test if the driver is still ok?
and what do i need to do a DIY replacement on the LED?
(i know i can get bare SSC emitter, and i need themeral glue? what else?)
i discovered that there is a crank on LED
so how can i test if the driver is still ok?
and what do i need to do a DIY replacement on the LED?
(i know i can get bare SSC emitter, and i need themeral glue? what else?
)
