rizky_p
Flashlight Enthusiast
Hi, my friend just finished his test on these two flashlights, i hope i can supply other flashlights to him to test so stay tuned.
The test was done on huge 2 meter ball weighting about 500kg all its own, attached to a machine as large as a standing fridge with printer and a dedicated PC as a console. I know the machine can do much more than this but in the mean time this will do.
Parameters : Fenix P1D / DX Cree P4 Projection
-------------------------------------------------------------
Correlated Color Temp : 6416 K / 6530 K
Luminous Flux : 83,5 lm / 108,86 lm
Color Shift : -0.00532 duv / +0.00118 duv
Red Color Ratio : 15,1 % / 13,7 %
Rendering Index. Ra : 80,8 / 74,9
Peak Wavelength : 450 nm / 445 nm
Color Difference : 16,0 SDCM / 7,8 SDCM
Radiant Flux : 0,286 W / 0,346 W
I dont understand what all the numbers means so i'll let anyone to judge.
More to come probably P3D and DX WF-400.
Enjoy :wave:
The test was done on huge 2 meter ball weighting about 500kg all its own, attached to a machine as large as a standing fridge with printer and a dedicated PC as a console. I know the machine can do much more than this but in the mean time this will do.
Parameters : Fenix P1D / DX Cree P4 Projection
-------------------------------------------------------------
Correlated Color Temp : 6416 K / 6530 K
Luminous Flux : 83,5 lm / 108,86 lm
Color Shift : -0.00532 duv / +0.00118 duv
Red Color Ratio : 15,1 % / 13,7 %
Rendering Index. Ra : 80,8 / 74,9
Peak Wavelength : 450 nm / 445 nm
Color Difference : 16,0 SDCM / 7,8 SDCM
Radiant Flux : 0,286 W / 0,346 W
I dont understand what all the numbers means so i'll let anyone to judge.
More to come probably P3D and DX WF-400.
Enjoy :wave:
Last edited: