Sold/Expired Q-Bin Tri-Cree, Fade Host, MCR20's *SOLD*

-Nascar Fade Host
-Tri-Flupic Driver board 2.8 amp Max
-UCL Lens
-3x Cree Q2 XR-E warm tint
-3x MCR20 Reflectors (modified for XR-E)
-Uses AW's new "C" size Li-Ion 3300mah cell
-Custom driver board holder
-Modamag's Copper Heatsink

$335 Delivered (US)

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

:wow:Nice anodizing:goodjob:

Do you have a beam shot? Wonder what kind of pattern you get with the Cree's in the MCR20?

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

starfiretoo said:

:wow:Nice anodizing:goodjob:

Do you have a beam shot? Wonder what kind of pattern you get with the Cree's in the MCR20?

Click to expand...

The 3 MCR20's put out a very nice beam with a nice hotspot and plenty of flood.

Mac

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

starfiretoo said:

:wow:Nice anodizing:goodjob:

Do you have a beam shot? Wonder what kind of pattern you get with the Cree's in the MCR20?

Click to expand...

Yeah those Nascar lights are sweet. Too bad im

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

An outdoor beam shot would be appreciated.

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

Bump $325 I need to move this to bring some $$$ to PF9

BTW I built 3.

I have a single level unit available for $300


Mac

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

Mac,

What is the run-time on this light?

Thanks

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

TSWrench said:

Mac,

What is the run-time on this light?

Thanks

Click to expand...

As for runtime the Flupic is completely adjustable for low and high modes. In burst mode the light draws approximately 2.5 amps which would be around 1.5 hours runtime. I usually set low mode to draw around 100ma which would be 33 hours of runtime and high to around 1 amp which would be over 3 hours. High mode is over 300 lumens and plenty bright.


Mac

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

cmacclel said:

Bump $325 I need to move this to bring some $$$ to PF9

BTW I built 3.

I have a single level unit available for $300


Mac

Click to expand...

Hi Mac, is your single level unit direct-driven or regulated?

Thanks.

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

Visible EM Wave said:

Hi Mac, is your single level unit direct-driven or regulated?

Thanks.

Click to expand...

The Single level is regulated. You can have your choice either 350ma to each emitter or 700ma to each emitter.

Mac

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

Thanks Mac, I think I'll take the Tri-Flupic version. PM sent.

Your lights are so beautiful. Can't resist.

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

I still have a single level light availabe regulated to 700ma each LED.

$300 Delivered

Mac

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

$280 Delivered in the US

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

Re: Q-Bin Tri-Cree, Fade Host, MCR20's

Light arrived. Very pretty. Very bright too!