-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
Sold/Expired WTB: AWR Hotdriver
- Thread starter Fitsbain
- Start date
Help Support Candle Power Flashlight Forum
jefft
Enlightened
You could try contacting AWR directly (you can PM me for his e-mail address) but if I were you, I'd wait for AW's regulated D soft-starter. (AW is _not_ AWR, as you probably are aware) His non-regulated C and D soft-starters are the bees knees, but I know there are a bunch of us waiting for his regulated D version.
I can sell you one for $80 delivered CONUS.
Nice thing about the 1164 is it is just under the 5A limit of protected Li-Ion circuit, and does not need the more involved high current modification of the hot driver. PM if you want it. I checked to make sure it is working right, and can set it for the voltage if you want to use it on arrival.
Nice thing about the 1164 is it is just under the 5A limit of protected Li-Ion circuit, and does not need the more involved high current modification of the hot driver. PM if you want it. I checked to make sure it is working right, and can set it for the voltage if you want to use it on arrival.
I was hoping to get just the driver board, and build my own with my existing mag switch, and a new KIU socket.
From talking to AWR it would seem that the HD or HP version is more advisable due to the large voltage difference from a 1164 to a 3 stack of li-ions.
From talking to AWR it would seem that the HD or HP version is more advisable due to the large voltage difference from a 1164 to a 3 stack of li-ions.
Although I have a spare board, I think most people only got full, built drivers. I have 12 HP hotdrivers, so I'm hanging on to my spare PCB.
Good luck!
Good luck!
