P3D rechargeables

Paintstorm

Newly Enlightened
Joined
Jun 15, 2006
Messages
42
I have the P1D and use rechargeables that I purchased from a recommendation from this site off of batterystation.com. Does anyone know if I can purchase similar batteries for the P3D. I understand that these batteries come off the charger at 4.3 volts. But I only use the flashlight at work in very short bursts, 30 seconds or less. I would appreciate any input, thanks.
 

derfyled

Flashlight Enthusiast
Joined
Jul 29, 2006
Messages
1,058
Location
Canada
No problem to use rechargeable. Unlike other Fenix, you won't loose the different brightness levels. On some older model, the tube might not fit some protected r123. You will have to try...
 

Steve L

Flashlight Enthusiast
Joined
Jan 22, 2007
Messages
1,470
Location
SE Michigan
You can order directly from AW in Dealers Corner in CPFMP. You can also get AW batteries from Lighthound. I have 2 different chargers either 1 would work. Ultrafire WF-138 is for 3.0 or 3.6v RCR123s or the Ultrafire WF-139 that is only for 3.6v batteries RCR123 with 15mm spacer, 14500, 17670, and 18650. I prefer the WF-139, it's more versatile. Both places mentioned above carry the batteries and chargers.
 
Last edited:

Paintstorm

Newly Enlightened
Joined
Jun 15, 2006
Messages
42
Great, thank you very much to everyone for your help. I greatly appreciate it.
 
Top