SF bezel ring removal?
- Thread starter bagman
- Start date
Help Support Candle Power Flashlight Forum
ROK
Enlightened
Here is my special tool made by 1.6t PCB.
I can easily open the bezel ring of Surefire and Aleph.
I can easily open the bezel ring of Surefire and Aleph.
houtex
Enlightened
I have used filed down needle nose pliers.
DaFABRICATA
Flashlight Enthusiast
HEAT!!! USE HEAT!!!
It will help loosen the crazy loctite surefire uses!.......trust me.....HEAT is a major factor in making bezel ring removal easier.
It will help loosen the crazy loctite surefire uses!.......trust me.....HEAT is a major factor in making bezel ring removal easier.
DaFABRICATA
Flashlight Enthusiast
I used to use a heatgun, but a torch is faster......just BE CAREFUL not to get it TOO HOT....
Start out with a little....You can always add more heat if needed.
I have used needle nose pliers in the detents on the 6P bezels and it has been working to open 6P, M3, & KL2 heads. Ijust opened them until the needle nose ends fit into the detents, then turn...
Start out with a little....You can always add more heat if needed.
I have used needle nose pliers in the detents on the 6P bezels and it has been working to open 6P, M3, & KL2 heads. Ijust opened them until the needle nose ends fit into the detents, then turn...
plasmaman
Enlightened
bagman - try a watch case back removing tool - I picked one up at Maplins the other day for a fiver, and removed the bezel from a 6P eeezily!
