Faulty DBS What to do?

Wolf-Eyes fan

Newly Enlightened
Joined
Jan 29, 2008
Messages
44
Hi everybody,

At friday I recieved my DBS V2 3SD. The first day it worked great and I was very happy, but the next evening it began to get weird. First it wouldn´t even turn on but after a few minutes it worked fine again. Then 5 minutes later it began to get very dim and then suddenly it began to mode hop.
Today it worked fine again, and i haven´t noticed anything at all.
I have already checked the batteries and they are almost fully recharged.
What should i do?

Thanks in advance from the new Dereelight owner
 

Steve L

Flashlight Enthusiast
Joined
Jan 22, 2007
Messages
1,470
Location
SE Michigan
Make sure the switch retaining ring inside the tailcap is tightened down(use something pointy in the 2 dimples).
 

ernsanada

Flashlight Enthusiast
Joined
Apr 29, 2004
Messages
2,962
Clean all contacts, threads, battery and springs. Make sure all sections, bezel assembly, battery tube and rear switch assembly are screwed on tight with each other.
 

bspofford

Enlightened
Joined
Apr 15, 2007
Messages
824
Location
Colorado
Clean all contacts, threads, battery and springs. Make sure all sections, bezel assembly, battery tube and rear switch assembly are screwed on tight with each other.

Do this first. If all else fails, Alan at DereeLight will take care of you.
 
Top