Interest for Titanium Aleph & E-series compatible heads?

I have been receiving many PM's requesting that I make ti heads and other parts. This thread is to determine the interest in my titanium heads for McGizmo, Aleph and E-series parts.

At this point I have made A1 and A19 heads. I could make an A2 head or any other compatible head if I had one to measure. But for the time being I'll focus on A1 and A19 heads.

For those that have not seen them here are a few pictures.



















All heads will be empty requiring you to supply Glass, O-ring, Reflector and Light Engine. Prices are + shipping and will likely be as follows.

A1 head no bezel ring $225
A1 with smooth Ti bezel ring $275 - Crenelated bezel add $15

A19 Head no bezel ring $200
A19 with smooth bezel ring $250 - Crenelated bezel ring add $15

I'll take an A1-head with crenelated Ti bezel ring $290.


Greetings:wave:

Im not sure what the smaller diameter head is ...but i will take the smaller one with a cren. bezel please.

I love that A1 head!!!

but i dont think i can afford one right now

I'm in for an A1 smooth bezel $275.

Also want a A19 smooth bezel $250.

Edited to add the A19.

I'm interested in :-

A1 with smooth Ti bezel ring $275
and
A19 with smooth bezel ring $250

Thanks

David :thumbsup:

I'm interested in :-

A1 with smooth Ti bezel ring $275
and
A19 with smooth bezel ring $250


Thanks :thumbsup:

Mirage_Man said:

Click to expand...

That is beautiful!

Definitely in for an A19 head w/smooth bezel ring.

• A1 with Crenelated Ti bezel ring $290

• A1 with smooth Ti bezel ring $275

:thanks: :thumbsup:

I'm in for;
1ea A1 with smooth Ti bezel ring -$275
1ea A19 with smooth Ti bezel ring-$250

:thumbsup:

Please put me down for:

1 - A1 with crenelated bezel
1 - A19 with crenelated bezel

Thanks!
Russell

A19 Head no bezel ring $200

Click to expand...

Will this come with a Ti retaining ring to hold in a window?

I could make an A2 head or any other compatible head if I had one to measure.

Click to expand...

I offered to loan you an A2.

I've managed to buy over a dozen A2 and A3 heads/lights in the past few months.

I'd say my interest has been established.

maxspeeds said:

Will this come with a Ti retaining ring to hold in a window?

Click to expand...

You have chosen the "no bezel ring option". The bezel ring is the Ti retaining ring, as you describe it, to hold in a window.

If you want the Ti retaining ring then order the other option.

A1 head no bezel ring $225
A1 with smooth Ti bezel ring $275 - Crenelated bezel add $15

A19 Head no bezel ring $200
A19 with smooth bezel ring $250 - Crenelated bezel ring add $15

Click to expand...

An extra $50 for the smooth bezel (window retaining) ring, or extra $65 for a crenelated (window retaining) ring.

Hope this helps

David :thumbsup:

dmdrewitt said:

An extra $50 for the smooth bezel (window retaining) ring, or extra $65 for a crenelated (window retaining) ring.

David :thumbsup:

Click to expand...

Is that for either or the A1 and A19?

thanks,

thom

Beautiful work, and thanks so much for using PhotoBucket -vs- ImageCrap.. lol, that place drives me with all the pu's etc.

You might want to clarify what fits what as E-series isn't mentioned in photos or pricing. Q, how bout trit slots in bezels, is that an option?.
Wish me well in Vegas next month so I can get on your list.

Looking good.. :twothumbs
X/BillyD..

thom said:

Is that for either or the A1 and A19?

thanks,

thom

Click to expand...

Yes :-

A1 head no bezel ring $225
A1 with smooth Ti bezel ring $275 - Crenelated bezel add $15

A19 Head no bezel ring $200
A19 with smooth bezel ring $250 - Crenelated bezel ring add $15

Click to expand...

All the information you need is in the quote, and also in the first post by MM

X_Marine said:

You might want to clarify what fits what as E-series isn't mentioned in photos or pricing. Q, how bout trit slots in bezels, is that an option?.
X/BillyD..

Click to expand...

E-series is mentioned in the title.

The A1 head has grooves in which it would be quite easy to insert a trit.

For the A19 head, a Peu's bezel-retaining ring with trit-slots would fit
the head and could be used as an alternative to the smooth or crenulated
bezel-retaining rings on offer.

WOW, it looks like your Ti' creations are really taking off.:twothumbs

Excellent work.:bow::bow:


Colin.

iw ill take one A1 with smooth Ti bezel ring $275 and one A19 with smooth bezel ring $250 = $ 525 total