which size trits for the PEU bezel

maxpower419 · Apr 28, 2008

cant seem to find the info on which size trit tubes fit in the PEU bezels for the novatacs (the ones sold on fenix's website)

Also, I know I saw some installation instructions for putting the tubes in the bezel somewhere, but cant seem to find them now, if some one could so kindly point me in the right direction...

Thanks in advance

-Ryan

cdosrun · Apr 28, 2008

Hi Ryan,

according to Four-seven's site, the tritiums required are 1.5mm diameter and 4.85mm long. I bought one of the Peu bezels for my Novatac and put a few of Bart's tritium phials in there with a Dremmel tool and a little patience.

With the right size tubes, just drop them into the slots with some glue or epoxy, otherwise bore the slots out a little first.

Hope that helps,

Andrew

96TL · Apr 28, 2008

Lurveleven's trits fit inside my Fenix bezel without any modifications. They were a perfect fit. I thought I would have to dremel it too. I was suprised.

maxpower419 · Apr 29, 2008

any certain epoxy ( other than norland, i dont have a uv light to cure it)

any one do a step by step install of this stuff?

which size trits for the PEU bezel

maxpower419

Newly Enlightened

cdosrun

Enlightened

96TL

Newly Enlightened

maxpower419

Newly Enlightened

Similar threads

Latest posts