Bosch 10.8 volt flashlight
- Thread starter ccnova
- Start date
Help Support Candle Power Flashlight Forum
Drewfus2101
Enlightened
I think your going to have to build your own. I don't think they make a MagLED that goes up past a 4 cell (6V).
MikeSalt
Flashlight Enthusiast
10.8 volt? Is it bi-pin? Does it have a metal reflector? If so, consider the mighty Welch-Allyn 1185 bulb :devil:
Arrrr...I stopped myself but i also wanted to suggest that!
maybe he's looking for more runtime and it won't help him:devil:
Drewfus2101
Enlightened
I would almost guarantee you its not bi-pin. I just modded my 18V dewalt (pics soon) with one of these:
http://www.dealextreme.com/details.dx/sku.5848
It was not for the faint-of-heart. It took mucho modding.
I'm pretty sure he is talking about something similar, based on the Bosch reference. You could try this, but again, it will take quite a bit of modding:
http://www.dealextreme.com/details.dx/sku.5862
And 350 lumens isn't that great for the wattage. You would probably be better off to just strap 3 x Crees in there on a large heatsink and direct drive them, since it will be more around 12V when fully charged (my 18V is up around 20V fully charged).
http://www.dealextreme.com/details.dx/sku.5848
It was not for the faint-of-heart. It took mucho modding.
I'm pretty sure he is talking about something similar, based on the Bosch reference. You could try this, but again, it will take quite a bit of modding:
http://www.dealextreme.com/details.dx/sku.5862
And 350 lumens isn't that great for the wattage. You would probably be better off to just strap 3 x Crees in there on a large heatsink and direct drive them, since it will be more around 12V when fully charged (my 18V is up around 20V fully charged).
Drewfus2101
Enlightened
Very similar to yours. Seeing yours is what finally got me motivated to get mine done.
