For sale heatsinked sandwich GD917 Cree XR-E Q5-WC. This is the brightest sandwich I have ever seen. Same exact sandwich as pictured here. Runs on 2xAA, 3AA, or 1x li-ion. 5.4v max. $65 $60 $50 SOLD shipped anywhere, PP fees included.
The height of the sandwich is the standard 17mm. The Cree is mounted on a pedastal that is 2mm high. If you want to use it in a host other than a minimag or with an adjustable head the reflector or optic you are using may not work or needs to be adjusted.
Because of the heatsink you will need to use a tailcap switch for this one. Because of the manufacturing differences with Mag, if the sandwich's pedastal does not fit through the opening you may have to open it up a bit with a reamer or something equivilent. These heatsinked sandwiches I make all fit the Minimags I have but there was a Minimag that someone else had where it fit very tight. It should fit freely.
Upon request only, I will include a thicker oring to keep the Minimag head from unwanted turning. For $5 SOLD more I will include a modfied & sputtered IMS20 reflector. Smooths all the rings out, also pictured in the above link with beamshots. Must have a bored out Minimag head to fit this one though.
Please post here or PM me if you have any questions.
Price includes US shipping. International, insurance, & PP fees not included. EDIT: I will include PP fees & international shipping (standard air mail) in the the price listed.
Thanks
The height of the sandwich is the standard 17mm. The Cree is mounted on a pedastal that is 2mm high. If you want to use it in a host other than a minimag or with an adjustable head the reflector or optic you are using may not work or needs to be adjusted.
Because of the heatsink you will need to use a tailcap switch for this one. Because of the manufacturing differences with Mag, if the sandwich's pedastal does not fit through the opening you may have to open it up a bit with a reamer or something equivilent. These heatsinked sandwiches I make all fit the Minimags I have but there was a Minimag that someone else had where it fit very tight. It should fit freely.
Upon request only, I will include a thicker oring to keep the Minimag head from unwanted turning. For $5 SOLD more I will include a modfied & sputtered IMS20 reflector. Smooths all the rings out, also pictured in the above link with beamshots. Must have a bored out Minimag head to fit this one though.
Please post here or PM me if you have any questions.
Price includes US shipping. International, insurance, & PP fees not included. EDIT: I will include PP fees & international shipping (standard air mail) in the the price listed.
Thanks
Last edited: