• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired HAIII Copper Colored Groovy with Multimode BitZ Driver--price dropped

PhotonFanatic

Flashlight Enthusiast
Joined
Dec 17, 2003
Messages
2,337
Location
western Massachusetts
Specially hardcoated (HAIII) Copper Colored Groovy for sale:

6061AL with HAIII copper color anodizing, 2.3 oz. with battery installed
Uses RCR123 battery (not included)
17mm smooth Khatod reflector
Kroll switch
1mm thick Luxar lens with double-sided AR coating
BitZ Driver--Specs:
  • LED : SSC P4 bin - USXOH
  • Driver : Highly efficient Buck-Boost converter with 3 regular brightness levels and 4 hidden signals.
  • Battery : One 3V CR123A or one 3.6V RCR123A (recommend AW's protected Li-Ion cell)
Driver and Brightness levels--Hidden Signals:
  • BitZ driver use a highly efficient Buck-Boost converter and it will control power to the LED even though you use 3.6V rechargeable Li-Ion battery. So, the LED will not be damaged by unregulated high current from Li-Ion battery. Of course, brightness with a regular 3V CR123A or a 3.6V rechargeable Li-Ion battery will be same.
  • Input voltage range : 1.8V ~ 5.5V
  • There are three basic brightness levels (Medium-Low-High) and four hidden signals (Strobe-Locating-Extreme Low-S.O.S.)
  • Brightness (estimated) : High (120~130 lumen), Medium (30~40 lumen), low (10 lumen)
  • Current to LED (tested) : High (500mA), Medium (150mA), Low (30mA)
  • Runtime (tested) : High (1~2 hours), Medium (3~6 hours), low (12~24 hours) depending on 3V or 3.6V.
  • Runtime for signal mode (tested by CR123A) : Strobe (7 hours), Locating (36 hours), Ext. Low (70 hours), S.O.S. (3 hours)
  • Basic three brightness levels has a Memory Function. You will get next level by Off and On within two seconds.
  • You will get into Signal mode by 8 consecutive On and Offs. No memory function in Signals.
  • Locator signal : useful mode for tracking and camping as "follow me" signal or location signal.
  • Extreme Low: This mode is useful as a overnight candle while tenting. Current to LED is 10mA.
CopperGroovyBitZSide3.jpg


CopperGroovyBitZFront.jpg


PRICE: $180,
was $190. First Class USPS shipping included (uninsured); foreign orders, please add $2 foreign fee.

Cash PayPal to: paycashpal (at) photonfanatic.com
Credit PayPal to: fanatic (at) photonfanatic.com

First, "I'll take it," gets it.

Thanks.
 
Last edited:

MarNav1

Flashlight Enthusiast
Joined
Mar 27, 2006
Messages
3,192
Location
Nebraska
Re: Copper Groovy with Multimode BitZ Driver

Really cool little light IMO!
 
Top