L1T Update

I was the one with a leaky battery in the tube, I finally got the #@%%^+*#%> battery out of the tube, cleaned it up, and it will not light, probably ruined the head asy. Oh well , I tried, I will just purchase another light. Thanks everyone for your help and advice.

Check all the areas that are ground contacts. Oxidization on these surfaces will result in a non-functional light. I do not think that a leaky battery would cause an L1T to die.

Clean the threads of the battery tube at the head especially well, and give it a light coat of lubricant. Also, clean the threads inside the head and the contacts on the circuit board. Do not neglect the switch, either. A toothbrush and Q-Tips with alcohol will do a good job for this task. Just be sure to allow things to dry before trying the light.

Try cleaning all the contacts.

If nothing works and you like the L1T format, try the L1T V2.0.