Casebrius
Newly Enlightened
What drop ins will fit an Ultrafire C2, I seem to have fried mine. Thanks
Ultrafire C2
- Thread starter Casebrius
- Start date
Help Support Candle Power Flashlight Forum
ernsanada
Flashlight Enthusiast
- Joined
- Apr 29, 2004
- Messages
- 2,962
No drop ins available.
You will have to take out the module and find a board that will fit inside. You can take out the module through the front of the light by unscrewing the module out.
Module taken out. Back shot of the board.
You will have to take out the module and find a board that will fit inside. You can take out the module through the front of the light by unscrewing the module out.
Module taken out. Back shot of the board.
Last edited:
shakeylegs
Enlightened
I want to say the board is 17mm. I fit one of these in the C2 pill (http://www.dealextreme.com/details.dx/sku.1886). It's relatively easy to replace the board and the emitter.
If you have a bare P7 emitter handy, the C2 is a great host. Just need to widen the reflector opening to 9mm. Kai has a direct drive multi mode board that fits the pill. Use it in conjunction with one 18650, and you're in big business.
If you have a bare P7 emitter handy, the C2 is a great host. Just need to widen the reflector opening to 9mm. Kai has a direct drive multi mode board that fits the pill. Use it in conjunction with one 18650, and you're in big business.
