Sold/Expired Jetbeam Pro III ST with a P7

:devil::devil:
Here is the Newly Modified Jetbeam Pro III ST
that i Shoveled a P7 into




Beamshots:

Control


Somewhat Low...


Maximum


The light retains all the original Programming modes.
It is Roughly 3x as bright as the Original Q5.
It has more of a Floody beam than it previously did,
but with sooo much output, Who Cares???

I am Asking $225.00OBO US, Shipping included, International Extra

Nice job on the mod, a bit out of my price range, but a good deal nonetheless. Good luck with your sale.

Very nice clean mod! I imagine that it get hot very quickly on the higher settings though.

Awesome!
Does it have the glow tail caps?
Or the features I mentioned?

vcw said:

Awesome!
Does it have the glow tail caps?
Or the features I mentioned?

Click to expand...

No glow caps for this one..
Just the Stock Jetbeam, with the P7 Added

Patriot36 said:

Very nice clean mod! I imagine that it get hot very quickly on the higher settings though.

Click to expand...

It doesn't get Hot very quickly

I just would not run it for more than 5 mins on high
without holding it to dissapate the heat.

What size battery is in this light, 18650?

That looks so cool!!! but i just bought two lights so i cant do it

Gary123 said:

What size battery is in this light, 18650?

Click to expand...

Yes Sir !

Did you use the stock driver?

About how many Ampere's is it driven?

toby_pra said:

Did you use the stock driver?

About how many Ampere's is it driven?

Click to expand...

1.34a on high to the led, 2.04a from the battery, about 1:20mins runtime
60ma on low, 20ma from the battery, about 70hrs runtime

Robert M.

This is very tempting.
I like the zero protrusion switch. Is it still a tactical forward clicky or did you change it to a reverse clicky?
I assume it tail stands now.

I am interested. But the research I do for this light pulls up pictures of a different looking light, basically with a larger head. Confusing.

What is the UI? 2 outputs, hi and low? Can it run indefinitely on hi in your hand or will it get so hot at some point it must be shut off. What are approximate lumens on low?

sclemin1 said:

This is very tempting.
I like the zero protrusion switch. Is it still a tactical forward clicky or did you change it to a reverse clicky?
I assume it tail stands now.

Click to expand...

I used the included reverse clickie.. but otherwise the tactical switch
is included, along with extra o-rings, lanyard, and button cover.

I made it a tailstander by spacing the button with an o-ring.
It woks perfect, and still retains the water-resistance properties.

Robert M.

Gary123 said:

I am interested. But the research I do for this light pulls up pictures of a different looking light, basically with a larger head. Confusing.

What is the UI? 2 outputs, hi and low? Can it run indefinitely on hi in your hand or will it get so hot at some point it must be shut off. What are approximate lumens on low?

Click to expand...

Here is the Light Link:
http://www.bugoutgearusa.com/jetiiiprost.html

And if you run it on high in your hand, it will get fairly warm.. My hands
are pretty sensitive to heat and cold, and i can tolerate it.

The UI is 3-modes. Each mode can be configured independantly.
#1 is Low-High Output
#2 is Low-High Output
#3 is the same as 1,2 but with Different Strobe modes Too.
You can adjust the frequency of the strobe from Sos, Flash, and
1Hz-15Hz Strobe.

Also, The Lowest output it has is 2 lumens.

Robert M.

I decided to take the plunge, I'll take it if it's still for sale.
PM sent.

Nice snag...(if you got it) :wave:

Crap. I was just coming to pull the trigger on this one. Nice snag!!

MSax

Hmmm, got any more of this?
What would be different from this and the trust fire other than the case?
I like the case of this.

vcw said:

Hmmm, got any more of this?
What would be different from this and the trust fire other than the case?
I like the case of this.

Click to expand...

I am actually in the process of replacing the driver
board.... I broke it on accident...
Don't insert the batteries in backwards, no matter
what the manufacturer says

It will be up for sale in the near future with a bit
of a price reduction... But it prob won't happen
for another couple of weeks

Robert M.