McE2S for G2 w/M60

SCEMan · Sep 29, 2008

I'm thinking about using a McE2S on a G2 to throttle down an M60 to where I can have M60L level perormance on low and use high as a "turbo" mode.

Does anyone know what resistor PCB I would use (5-10-22) to accomplish this?

Thanks for the help...

KDOG3 · Sep 29, 2008

Good question. I got the 60 ohm in my C2/BOGQ5 cuz I wanted to get a low low. It puts out about 10+ lumens on low. As I recall the M60L is 140 lumens, are you sure you want to go that high?

SCEMan · Sep 29, 2008

KDOG3 said:
As I recall the M60L is 140 lumens, are you sure you want to go that high?

Good question. I'm also going with the 60 ohm resistor in my 6P GM M60 Malkoff as an all purpose light.

But I plan to take the G2 on nightly hikes and would simply use the M60 if the nitrolon head/body could support it. Since it can only handle short periods, I figure I'll use an McE2S to drop it down as bright/hot as the G2 can manage for extended use.

McE2S for G2 w/M60

SCEMan

Flashlight Enthusiast

KDOG3

Flashlight Enthusiast

SCEMan

Flashlight Enthusiast

Similar threads

Latest posts