Sold/Expired "Sold " Custom Trustfire TR-801 with P7 and 5-Mode Driver "More Beamshots" "Sold"

"Sold " Custom Trustfire TR-801 with P7 and 5-Mode Driver "More Beamshots" "Sold"

Here ya go folks, another TR-801 with a P7 built
just for that lucky person that says "I'll Take It"!

Some Pics for All....






Here are some New Beamshots:
They are in this order, Control,Low,High:




Another View:
Same order, Control,Low,High



Obviously it is REALLY hard to capture what the Eye sees
with a camera... But there is ALOT more sidespill than
meets the eye, hehe:nana:

The Mini-Clip for a key-chain can be omitted if you want.
It has a DSWOJ P7 running from the stock 5-Mode
Driver that the light came with. It is running from about
1400ma on high.. That is about 2x as bright as the
original Q5 that it came with. It is more of a short
thrower than a long distance one, which is perfect for
a nice bright pocket EDC :thumbsup: G.I.T.D. Tail-Cap Also.

The modes are High,Med,Low,Strobe,S.O.S.

I am asking 120.00$ for this little gem
Shipping for Conus Included, Intl. Extra :wave:

Forgot to add, it has Mode Memory

Robert M.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

Bump in the night...

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

What lumens do you expect this to be?
What kind of batteries does it use?
I'll pay more if you put more features,
tail backlight with lockout, and thermal epoxy in the inside.
Also, what kid of batteries does it use?
I'm really looking to get one of these.

Thanks!
Victor

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

What lumens do you expect this to be?
What kind of batteries does it use?
I'll pay more if you put more features,
tail backlight with lockout, and thermal epoxy in the inside.
Also, what kid of batteries does it use?
I'm really looking to get one of these.

Thanks!
Victor

Click to expand...

It uses 18650 Lithium-ions
The tailcap cannot be made to self-glow with an
led due to the type of driver it uses.
It will do a lockout though :thumbsup: just unscrew the
cap a quarter-turn

I can supply you with a set of 2 18650's and
a charger... But it will cost about 30.00 extra
That covers the cost of the charger, and batts,
plus the extra shipping involved.

You can get those items on Dealextreme.com
if you want to go that route, or don't have them.

Robert M.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

How bout just the 2 batteries?
Just stuff the batteries into the package,

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

How bout just the 2 batteries?
Just stuff the batteries into the package,

Click to expand...

Then i Assume you have a proper charger?
I am not trying to be a smarta$$ but i am
trying to look out for ya! I don't want you to
blowup those batts in the wrong charger

Okay, then 10.00 extra... So, 130.00 Shipped
to Los Angelos ? If you want it...
Paypal me: robertkmagill @ hotmail . com

Woohoo!

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

I have the 18640 batteries for my RPL laser, so it should work.
What brand are they?
Did you put thermal epoxy or a better heatsink in them?
Do you think you can find a different driver for this light?
2 modes would be good enough.
This light is waterproof, right?
Just making sure,

Thanks!
Victor

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

I have the 18640 batteries for my RPL laser, so it should work.
#1 What brand are they?
#2 Did you put thermal epoxy or a better heatsink in them?
#3 Do you think you can find a different driver for this light?
2 modes would be good enough.
#4 This light is waterproof, right?
Just making sure,

Thanks!
Victor

Click to expand...

#1 Blue-Label Trustfire 2500ma

#2 Yes, Arctic Ceramic Epoxy was
used to afix the P7 to the Stock heatsink

#3 Maybe, But the lead time would be
quite a while.. and could cost up to
40.00 more for just the driver..

#4 Water-Resistant... Not Water-Proof
It will survive a quick dunk in the water
for a second.. but not a "Dive".
I did silicone the front glass in place for
the light to be water resistant, As they
don't come that way from the factory.
All seals have been greased too.

Robert M.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

Hmmm, what other models do you have?
I would like one that's water proof.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

Hmmm, what other models do you have?
I would like one that's water proof.

Click to expand...

How far down underwater would you like to go
with it?

Right now i only have 2 lights for sale.
The other one is the 3x P7 Mag Floodlight with
a built-in fan for cooling.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

Wow mag with a fan in it?!?!
I'm looking for something compact.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

Wow mag with a fan in it?!?!
I'm looking for something compact.

Click to expand...

Do you want it to go farther down underwater?
How far? 10 feet? let me know

I will have the jetbeam up for sale in a couple
of weeks if i can.. But it is on the backburner...

Robert M.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

How will you make it waterproof?
Can you fill the whole light with thermal epoxy?
Fill every gap, cormer, etc...
I just want it as durable as possible, like a surefire.
How will it compare to a Jetbeam or a Surefire, durability wise.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

How will you make it waterproof?
Can you fill the whole light with thermal epoxy?
Fill every gap, cormer, etc...
I just want it as durable as possible, like a surefire.
How will it compare to a Jetbeam or a Surefire,

Click to expand...

This light is just a durable as a jetbeam or surefire.
And Yes, i will fill the front of the light with epoxy
to make it waterproof. It will still be fully servicable,
Should you want to change the led, or clean the o-rings.
By looking at the outside, you would not be able to
tell i made it fully waterproof.

Robert M.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

So this light will be completely submersable?
Trustfire just sounds like a generic name for Surefire, so I think it's not durable, :\
What kind doea the trustfire lights use?
And how thick is the metal?

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

#1 So this light will be completely submersable?

#2 Trustfire just sounds like a generic name for Surefire, so I think it's not durable, :\

#3 What kind doea the trustfire lights use?
And how thick is the metal?

Click to expand...

#1 Yes

#2,3 It is a generic light.. And the metal is as thick
as my jetbeam.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

Hmmmm...
What would make the JetBeam more expensive?

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

Hmmmm...
What would make the JetBeam more expensive?

Click to expand...

Hehe, The Name....
Thats all there is too it..
I would personally take either one.

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

Do you think you'll be able to put the glow tail cap with lockout on the JetBeam?
How bout the trustfire?

Re: Custom Trustfire TR-801 with P7 and 5-Mode Driver

vcw said:

Do you think you'll be able to put the glow tail cap with lockout on the JetBeam?
How bout the trustfire?

Click to expand...

The trustfire has a glow in the dark cap, but i cannot
put the led behind it due to the driver board..

The Jetbeam only comes with a black tailcap..
It can be changed to a glow in the dark cap,
but i cannot change it to an led glow either..

There are very few driver boards that can pull
this led glowcap function off... and i don't have
any more of those drivers.. it would cost about
20.00 more to do it, and it would take about
2-3 weeks to get an order in.