Surefire M6 package: $500 shipped.
Surefire M6 body SPF to GRoLED
6 x Surefire CR123 cells SPF to GRoLED
Standard MB20 battery holder SPF to GRoLED
2 x Fivemega MN Bipin adapters Still available $80 shipped for both
2 x Fivemega 3 x 17670 battery holders Sold and shipped to Grox
1 x Mdocod 2 x 18650 battery holder Sold and shipped to Grox
1 x MN21 bulb Sold and shipped to Grox
1 x MN20 bulb Sold and shipped to Grox
6 x AW 17670 cells Sold and shipped to Grox
2 x SonyKonion 18650V cells Sold and shipped to Grox
1 WA1185 bulb. Removed
M6 still available - complete light as you would buy new, without MN20 bulb. $300 shipped. P226Yooper has first option.
Post interest in the body as backup to P226Yooper if you like.
I think 24 hours is fair to leave it reserved.
More pics here:
http://s38.photobucket.com/albums/e108/jflights/
Use:
The AW 17670 cells have had approx 1 run each with 1185 bulb , 1 run each with LF HO-M6R bulb
and one pack had a run with 1331 bulb. Cells were also discharged on BC6-10 charger to test performance. So about 4-5 runs each pack.
The Surefire cells have had about 2 mins run , just a few quick blasts to compare to other setups.
The MN21 has had less than 1 hour , the MN21 similar.
One of the LF HO-M6R bulbs is brand new , one bought used on CPF , said to have had about 30 minutes. I have added 2 x 30 minute runs.
There's one WA1185 with some use.
The Sony cells have had several runs , they were pulled from a Makita drill pack. They sag a little more than these cells should under load , capacity is around spec though. Means they won't drive MN21 too hard if you want to use them for that.
The M6 itself sits on a rubber mat and has been carried in a soft pocket. No drops, I can't see any scratches , but I'll just go with excellent condition to be on the safe side.
I have the original box and manual.
Happy to email higher res close ups of the light for interested buyers.
Total weight of parts is 1175g. With packaging approx 1425g.
I expect to get offers for individual items , I'll wait at least a few days before breaking up.
Shipping quote is via Australia Post , Express shipping international, with tracking. Insurance or other shipping option would be additional cost, happy to talk about other options.
Surefire M6 body SPF to GRoLED
6 x Surefire CR123 cells SPF to GRoLED
Standard MB20 battery holder SPF to GRoLED
2 x Fivemega MN Bipin adapters Still available $80 shipped for both
2 x Fivemega 3 x 17670 battery holders Sold and shipped to Grox
1 x Mdocod 2 x 18650 battery holder Sold and shipped to Grox
1 x MN21 bulb Sold and shipped to Grox
1 x MN20 bulb Sold and shipped to Grox
6 x AW 17670 cells Sold and shipped to Grox
2 x SonyKonion 18650V cells Sold and shipped to Grox
1 WA1185 bulb. Removed
M6 still available - complete light as you would buy new, without MN20 bulb. $300 shipped. P226Yooper has first option.
Post interest in the body as backup to P226Yooper if you like.
I think 24 hours is fair to leave it reserved.
More pics here:
http://s38.photobucket.com/albums/e108/jflights/
Use:
The AW 17670 cells have had approx 1 run each with 1185 bulb , 1 run each with LF HO-M6R bulb
and one pack had a run with 1331 bulb. Cells were also discharged on BC6-10 charger to test performance. So about 4-5 runs each pack.
The Surefire cells have had about 2 mins run , just a few quick blasts to compare to other setups.
The MN21 has had less than 1 hour , the MN21 similar.
One of the LF HO-M6R bulbs is brand new , one bought used on CPF , said to have had about 30 minutes. I have added 2 x 30 minute runs.
There's one WA1185 with some use.
The Sony cells have had several runs , they were pulled from a Makita drill pack. They sag a little more than these cells should under load , capacity is around spec though. Means they won't drive MN21 too hard if you want to use them for that.
The M6 itself sits on a rubber mat and has been carried in a soft pocket. No drops, I can't see any scratches , but I'll just go with excellent condition to be on the safe side.
I have the original box and manual.
Happy to email higher res close ups of the light for interested buyers.
Total weight of parts is 1175g. With packaging approx 1425g.
I expect to get offers for individual items , I'll wait at least a few days before breaking up.
Shipping quote is via Australia Post , Express shipping international, with tracking. Insurance or other shipping option would be additional cost, happy to talk about other options.
Last edited: