Looking for LED with Tightest beam

MoreLumens4Me · Oct 12, 2008

Check out the Dereelight DBS V2 and look for the one output pill.
http://www.dereelight.com/dbsv2.htm
http://www.youtube.com/watch?v=KxkA4wXo3_0

tekguy · Oct 12, 2008

inova t3 tiros version

fireboltr · Oct 12, 2008

OP stated that they wanted to upgrade their 6p not buy a dereelight.....

As far as what you are looking for in a d26 (p60) host I would suggest the Malkoff M60 hands down. I have a couple and will not part with them.
The other drop in I would suggest would be the lumens factory d26 led dropin.

Youfoundnemo · Oct 13, 2008

If they made white lasers i would be all over it, but they dont =[

Gunner12 · Oct 13, 2008

The P60 type drop-ins right now seem to be limited by space. The best you can get I can think of is one of the Dereelight drop-ins with the smooth reflector. A member here, I think it was WadeF, got around 10000 lux after focusing the drop-in a bit.

If you feel like modding, the right lens or optic might give you more throw.

RyanA · Oct 13, 2008

HistoryChannel said:
Hi,

I was trying to read through the P60 Drop in topic and my head is spinning.

Can someone suggest which one to get? I want the brightest possible with the tightest beam.

I bought a couple of Cree R2's and its ok.

Any suggestions would be much appreciated.... Trying to upgrade my 6P.

Would like:
-1 mode
-Brightest possible from 6 or 9v
-Tightest beam

THANKS!!!

The malkoff m60. It has the tightest beam I know of for a standard 6p head. It uses an optic to achieve this. The led is a Q5 but because of the optic and driver combination it pumps out more than 200 real lumens. It's been tested by a few of the members here.

malkoffdevices.com

Webrouzer · Oct 13, 2008

insanefred said:
A laser beam? :lol:

I have the Olight Warrior (R-2) and find it to be the best single LED thrower. The Olight t-20 (220 Lumen) is CRAZY TIGHT....keeps a perfect circle at over 300 feet.
I get mine at www.cfrlights.com Check with them and tell them what you want. They are very knowledgeable.

Webrouzer

HistoryChannel · Oct 13, 2008

Hi,

I was trying to read through the P60 Drop in topic and my head is spinning.

Can someone suggest which one to get? I want the brightest possible with the tightest beam.

I bought a couple of Cree R2's and its ok.

Any suggestions would be much appreciated.... Trying to upgrade my 6P.

Would like:
-1 mode
-Brightest possible from 6 or 9v
-Tightest beam

THANKS!!!

insanefred · Oct 13, 2008

A laser beam? :lol:

HistoryChannel · Oct 17, 2008

Thanks guys! I appreciate it, I think I will have to try some of the ones you've suggested....

Is the BOG "Super Premium" LED drop in any good? (Cree Q5 Super Premium). I was looking at that but none of you suggested it.

Gunner12 · Oct 17, 2008

It is a good drop-in.

The textured reflector means that it has a bit less throw then a smooth reflectored light though.

There is only so much space available for the drop-in and it seems like the throw is much more limited by the space then by reflector or optic design.

Looking for LED with Tightest beam

MoreLumens4Me

Newly Enlightened

tekguy

Newly Enlightened

fireboltr

Enlightened

Youfoundnemo

Enlightened

Gunner12

Flashaholic

RyanA

Flashlight Enthusiast

Webrouzer

Banned

HistoryChannel

Enlightened

insanefred

Enlightened

HistoryChannel

Enlightened

Gunner12

Flashaholic

Similar threads

Latest posts