AA LED on an AR-15

gunfighter

Newly Enlightened
Joined
Sep 6, 2007
Messages
119
Location
West Michigan
My buddy is looking for a high-powered AA light for this M4gery. He wants a AA powered package to maintain commonality with his AA powered optic.

Can anyone suggest a package that meets as many of the following requirements as possible;

  • 2xAA battery
  • 1-mode forward tactical clicky (or ability to buy a 1-mode pill)
  • Q5 emitter
  • Oversized reflector assembly
Any suggestions would be appreciated. I've already begun a search for him, but am just not feeling like I've covered all the possible scenarios. For example, some Fenix models seem to fit the bill, but I'm not sure if I can get a 1-mode version.

Thanks CPF! :twothumbs
 
Last edited:

HKJ

Flashaholic
Joined
Mar 26, 2008
Messages
9,715
Location
Copenhagen, Denmark
For example, some Fenix models seem to fit the bill, but I'm not sure if I can get a 1-mode version.

All TK models from Fenix has just one mode on the button and it is a forward switch. The actual selection between high/medium is done by turning the head.

Dereelight is another good light, where your can select a 1 mode pill.
 

Marduke

Flashaholic
Joined
Jun 19, 2007
Messages
10,110
Location
Huntsville, AL
The TK20 would fit the bill. If you just keep the head tight (or loose) it stays in one mode and no possible combination of clicks will change it. It has decent throw, and a warm tint to better see and identify anything he's pointing it at... :xyxgun:


He can slip off the rubber grip if it helps the gun mount fit better.


The E20 might also qualify.
 
Last edited:

cabbynate

Newly Enlightened
Joined
Jun 19, 2008
Messages
123
He could wait for these to hit the market. No over sized reflector but will make a nice weapons light. :

novatac4sb5.jpg
 

metlarules

Flashlight Enthusiast
Joined
Jan 30, 2008
Messages
1,027
Try a Surefire 9p with a dereelight single mode drop-in to suit that voltage(3v or less).Drop in a piece of pvc that has an outside diameter of a 9p inside diameter and inside the tube drop in 2 aa's. I'd use eneloops.Plus a 6p/9p looks at home on a ar15.
 

gunfighter

Newly Enlightened
Joined
Sep 6, 2007
Messages
119
Location
West Michigan
I'm not finding any info on the Fenix TK 25. And I can't find a Dereelight that runs on AAs.

Will a SF 9P properly fit 2xAAs?

Help! :mecry:
 

HKJ

Flashaholic
Joined
Mar 26, 2008
Messages
9,715
Location
Copenhagen, Denmark
I'm not finding any info on the Fenix TK 25. And I can't find a Dereelight that runs on AAs.

Will a SF 9P properly fit 2xAAs?

Help! :mecry:

Sorry about that, I did not see the AA part.
He probably mean Fenix TK20 that uses 2*AA.

Olight also has a T25 tactial with 2 AA batteries and mode change by turning the head, i.e. the switch does not change mode.
Same goes for iTP C8 tactical.
 

Gunner12

Flashaholic
Joined
Dec 18, 2006
Messages
10,063
Location
Bay Area, CA
The Fenix TK20 might be a good choice. It doesn't have a Cree XR-E Q5, but the warm tinted Q2 they use might work as well as the Q5.

The Olight T25 tactical and iTP C8 tactical might work.
 

metlarules

Flashlight Enthusiast
Joined
Jan 30, 2008
Messages
1,027
I'm not finding any info on the Fenix TK 25. And I can't find a Dereelight that runs on AAs.

Will a SF 9P properly fit 2xAAs?

Help! :mecry:
If you get a piece of pvc from the hardware store that slips into the 9p with an internal diameter that will fit aa's it will.

Look for the Dereelight pill that has a 2.7v to 4.2v input and it will work.
 

Marduke

Flashaholic
Joined
Jun 19, 2007
Messages
10,110
Location
Huntsville, AL
If you get a piece of pvc from the hardware store that slips into the 9p with an internal diameter that will fit aa's it will.

Look for the Dereelight pill that has a 2.7v to 4.2v input and it will work.

You sure? Two fully charged AA cells are just barely 2.7v, and will bottom out at ~1.8v when discharged.
 

Sgt. LED

Flashaholic
Joined
Sep 4, 2007
Messages
7,486
Location
Chesapeake, Ohio
Really?
Maybe you aren't doing a very good job.

Granted a PVC sleeve is better than wrapping but I have never had any issues.
 

LukeA

Flashlight Enthusiast
Joined
Jun 3, 2007
Messages
4,399
Location
near Pittsburgh
Really?
Maybe you aren't doing a very good job.

Granted a PVC sleeve is better than wrapping but I have never had any issues.
Baselessly insinuating that I'm mechanically incompetent? Hmm.

And a PVC sleeve is less reliable than a properly fitting battery tube.
 

gunfighter

Newly Enlightened
Joined
Sep 6, 2007
Messages
119
Location
West Michigan
Thanks for all the input guys. I have narrowed it down to the below choices. It is a fairly long list, so help me chop it further. I'd like to know your opinions of overall quality;

1. Fenix TK20
2. Olight T25-T
3. NiteCore D20
4. EagleTac P10A2
5. iTP C8T Tactical

I'm leaning NiteCore due to "perceived quality" and conservative lumen ratings. Would that be a prudent decision?
 

HKJ

Flashaholic
Joined
Mar 26, 2008
Messages
9,715
Location
Copenhagen, Denmark
NiteCore is the only one without a forward switch and when pressing the switch your may change light output. I also has a recessed switch.

The Fenix TK20 is thicker than the other lights and has a bigger reflector.

Your can compare four of them here:
DSC_2912a.jpg


DSC_2914a.jpg


DSC_2915a.jpg
 
Top