Ouestion on MAHA : MH-C401FS charger

grateful1 · Nov 5, 2008

Hi,
I have 2 of these was wondering if I might use them(safely) on the Sanyo eneloop 2000mA batteries I just bought?

I also picked up some other 800mA rechargables that I believe should do fine.

INput: DC 12V. 1000mA
Output: DC 1.2V. 1000Ma x 4Ch

Charge only 1.2V AA / AAA NiMH / NiCD
(yea..it's pretty clear...but WTH!)

Thanks...and :poof:

!

btw - I did a search and folks seem to like these...I just couldn't decipher if what I am looking to have work..will work!

Mr Happy · Nov 5, 2008

grateful1 said:
I have 2 of these was wondering if I might use them(safely) on the Sanyo eneloop 2000mA batteries I just bought?

In short...yes, no problem.

grateful1 · Nov 5, 2008

Mr Happy said:
In short...yes, no problem.

Thanks!

moldyoldy · Nov 5, 2008

If you check in the sticky at the top of the forum and pull up the thread on NiMH chargers, look at the comments on the Maha MH-C401FS charger on fast charge. the low-rate charge is OK. the high rate charge is not OK. I and my family have experienced these problems on the fast charge rate setting, especially in Germany on 240vac. Silverfox has performed a highly beneficial service to the CPF community with his thorough testing!

Ouestion on MAHA : MH-C401FS charger

grateful1

Newly Enlightened

Mr Happy

Flashlight Enthusiast

grateful1

Newly Enlightened

moldyoldy

Flashlight Enthusiast

Similar threads

Latest posts